RD28 EGR Valve
Posted: Mon Jul 02, 2007 7:59 am
Blocked off the EGR Valve on the weekend, thought I'd share the plate dimensions with you all.
Simple to do, have gasket already glued to both sids of EGR plate, remove intercooler pipes (flat blade screwdriver), loosen off valve nuts (12mm spanner), lever valve enough for plate to slip down (flat blade screwdriver) apply sealant to EGR plate, slip in, tighten up, put intercooler pipes back on.
Did it make a difference??? barely.
Simple to do, have gasket already glued to both sids of EGR plate, remove intercooler pipes (flat blade screwdriver), loosen off valve nuts (12mm spanner), lever valve enough for plate to slip down (flat blade screwdriver) apply sealant to EGR plate, slip in, tighten up, put intercooler pipes back on.
Did it make a difference??? barely.