Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

GUARD CHOPPING

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 52
Joined: Sun Jul 15, 2007 8:08 pm
Location: perth

GUARD CHOPPING

Post by poppeye »

i am looking at chopping the back quarter panels off my guards on my gq shorty i have chopped the rest of it but am not sure how to chop the corners off does anyone have photos of theirs and how they did it as i am not sure

because there is the wire going into box were for tail light so it will need to be sealed back up any help would be great

cheers
Top
User avatar
JWB
Posts: 451
Joined: Sun Aug 24, 2003 5:48 pm
Location: Logan

Post by JWB »

There was a complete step by step post I read on here a few months back

If you can work out the search function you will find all info needed

good luck!

The post in question made it look very easy, anywhere from a couple of hours job thru to an anal 2 day job :D
cheers
JB
Top
Posts: 601
Joined: Mon Nov 15, 2004 6:52 pm
Location: North West Melbourne

Contact:
Contact dwaynes

Post by dwaynes »

heres one we prepared earlier


http://www.mudrhino.com.au/Docs/DIY2.pdf
www.mudrhino.com.au
Top
Posts: 52
Joined: Sun Jul 15, 2007 8:08 pm
Location: perth

Post by poppeye »

cheers guys
Top
Posts: 965
Joined: Fri Mar 26, 2004 10:09 am
Location: B.F.E

Contact:
Contact RMP&O

Post by RMP&O »

http://www.rmp-o.com/phpbb/viewtopic.ph ... &start=100
www.rmp-o.com
Top
Posts: 52
Joined: Sun Jul 15, 2007 8:08 pm
Location: perth

body mount

Post by poppeye »

just one more question before i chop what do i do about the bodymount on the back quarter panel its right were i need to cut

any help would be great
Top
Posts: 1047
Joined: Sun Nov 19, 2006 2:27 pm
Location: Wollongong

Post by Nelso »

Cut the outer panel off first then cut the inner shell from the outside, being careful not to cut too deep otherwise you will cut into the bodymount.
What's the difference between ignorance and apathy? I don't know and I don't care.

I am an insomniac dyslexic agnostic. I often lay awake all night wondering if there really is a Dog.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 1 guest