Page 1 of 1
GUARD CHOPPING
Posted: Sun Jul 15, 2007 8:12 pm
by poppeye
i am looking at chopping the back quarter panels off my guards on my gq shorty i have chopped the rest of it but am not sure how to chop the corners off does anyone have photos of theirs and how they did it as i am not sure
because there is the wire going into box were for tail light so it will need to be sealed back up any help would be great
cheers
Posted: Sun Jul 15, 2007 8:34 pm
by JWB
There was a complete step by step post I read on here a few months back
If you can work out the search function you will find all info needed
good luck!
The post in question made it look very easy, anywhere from a couple of hours job thru to an anal 2 day job
cheers
Posted: Mon Jul 16, 2007 8:23 am
by dwaynes
Posted: Mon Jul 16, 2007 1:51 pm
by poppeye
cheers guys
Posted: Mon Jul 16, 2007 2:06 pm
by RMP&O
body mount
Posted: Fri Jul 20, 2007 3:07 pm
by poppeye
just one more question before i chop what do i do about the bodymount on the back quarter panel its right were i need to cut
any help would be great
Posted: Fri Jul 20, 2007 5:30 pm
by Nelso
Cut the outer panel off first then cut the inner shell from the outside, being careful not to cut too deep otherwise you will cut into the bodymount.