Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Little Gauze filter in fuel pump on Gu 2000 4.2 TD engine
Little Gauze filter in fuel pump on Gu 2000 4.2 TD engine
How small is the spring and filter and how do I get it out, I know where it is and what has to be undone but I don't want to lose the frigen things if I take them out.
When the Boogy Man goes to sleep.... he checks his Cupboard for chuck norris
Chuck Norris doesn't go Hunting, because hunting can mean failure or success..... Chuck Norris go's Killing
Chuck Norris doesn't go Hunting, because hunting can mean failure or success..... Chuck Norris go's Killing
Re: Little Gauze filter in fuel pump on Gu 2000 4.2 TD engin
there is no spring.. You undo the banjo bolt on the inlet side of pump, and look inside you will see the filter - if your car has one. They dont all have it. My 03 model does not.
YMMV.
YMMV.
Ooh ok sweet, that might be why I can't see it lol, if there is one, how far down into the hole is it located, just after the banjo bolt I guess ay
When the Boogy Man goes to sleep.... he checks his Cupboard for chuck norris
Chuck Norris doesn't go Hunting, because hunting can mean failure or success..... Chuck Norris go's Killing
Chuck Norris doesn't go Hunting, because hunting can mean failure or success..... Chuck Norris go's Killing
Mine has a spring and the filter.
Easiest way I have found to remove it is get a piece of electric wire (ie 4mm) and strip it about 5 mm at the end. Then fray the wires back on themselves like a squid hook, push it lightly into the hole until it stops then pull it out. I nothing comes out, you don't have one.
To remove the wire from the filter just twist it to close the frayed wires and should pull straight out of the filter (after removal from the pump obviously)
Easiest way I have found to remove it is get a piece of electric wire (ie 4mm) and strip it about 5 mm at the end. Then fray the wires back on themselves like a squid hook, push it lightly into the hole until it stops then pull it out. I nothing comes out, you don't have one.
To remove the wire from the filter just twist it to close the frayed wires and should pull straight out of the filter (after removal from the pump obviously)
KRiS
Who is online
Users browsing this forum: No registered users and 1 guest