engine mounts

Post by **short stuff** » Sat Jul 21, 2007 7:27 pm

roadless gear are good and reliable took a week and my mounts are here

http://www.roadlessgear.com/page/RGL/PROD/E/RG241
http://www.roadlessgear.com/Merchant2/m ... e_Code=rgl

Post by **St Jimmy** » Sat Jul 21, 2007 7:31 pm

what did they cost landed in oz

as i need a set soon

Post by **short stuff** » Sat Jul 21, 2007 7:57 pm

i bought two sets of mounts and it cost me $75
$20 per set of mounts
$35 shipping so i guess just half the price

Post by **zuku26** » Mon Jul 23, 2007 12:51 am

Just for your info. The roadless mounts are literally dodge 318 mounts!!
I'm not sure if you guys have dodge's over there. But all dodge mounts with the 318 motor bolt on.
You can get these at any corner auto store for about $10.00. They usually come with a lifetime warranty so if somehow you break one you can replace quick.
Proof:
http://bbs.zuwharrie.com/content/topic,2674.0.html

Post by **lay80n** » Mon Jul 23, 2007 11:10 am

zuku26 wrote:Just for your info. The roadless mounts are literally dodge 318 mounts!!
I'm not sure if you guys have dodge's over there. But all dodge mounts with the 318 motor bolt on.
You can get these at any corner auto store for about $10.00. They usually come with a lifetime warranty so if somehow you break one you can replace quick.
Proof:
http://bbs.zuwharrie.com/content/topic,2674.0.html

We had the 318ci in some valiants. Mate has a 318 in his VK Val wagon, will try to get some pics of the mounts.

Layto....

Post by **vicelore** » Mon Jul 23, 2007 11:46 am

zuku26 wrote:Just for your info. The roadless mounts are literally dodge 318 mounts!!
I'm not sure if you guys have dodge's over there. But all dodge mounts with the 318 motor bolt on.
You can get these at any corner auto store for about $10.00. They usually come with a lifetime warranty so if somehow you break one you can replace quick.
Proof:
http://bbs.zuwharrie.com/content/topic,2674.0.html

good info dude..

Post by **nicbeer** » Mon Jul 23, 2007 12:09 pm

hmm

i got an old valiant guy down the road. may have to go asking.

Do you use left and right dodge ones to replace both zook ones or is it only one side replacement.

Nic

Post by **smileysmoke** » Mon Jul 23, 2007 12:54 pm

i read about this a while back but i think there may be some drilling involved as the thread is larger? i may be wrong.
pretty sure there is an article on izook. (had a look but cant find it..)

Post by **short stuff** » Mon Jul 23, 2007 8:09 pm

yeh you need to drill it out a little bit

Post by **vicelore** » Tue Jul 24, 2007 9:29 am

nicbeer wrote:hmm

i got an old valiant guy down the road. may have to go asking.

Do you use left and right dodge ones to replace both zook ones or is it only one side replacement.

Nic

i thaught zook RHS and LHS are the same ??

Post by **nicbeer** » Tue Jul 24, 2007 11:22 am

Got a good point there, always only bought one so cant comment, always the exhaust one dieing on me.

Nic

Outer Limits 4x4 Board

engine mounts

engine mounts

Who is online