Outer Limits 4x4 Board

hey guys just wondering if anyone has ever fitted a k&n filter to one of these ?an does anyone have any pics of the filter in it??


also does anyone know how wel the rummer seal at the bottem is for keeping water out?

Do a search on here about the filter, not recommended so the experts say.

yeah i searched under filter in rover and it doesnt have alot of info

i found one thread asking for same thing but no pictures on it

im only asking as i dont have any filters in it at all atm

i know the drain thing at the bottem works good if its clean but how well does it work while submerged

rusty_042 wrote:yeah i searched under filter in rover and it doesnt have alot of info

i found one thread asking for same thing but no pictures on it

im only asking as i dont have any filters in it at all atm

i know the drain thing at the bottem works good if its clean but how well does it work while submerged

The oe paper elements are preferred by most as the K&N tend to actually reduce airflow and get clogged easily. If the filter housing is submerged you will be on the end of a winch cable so sealing wont be a problem anymore

fair enuf lol i can imagine that happenin to but still how well does that lil rubber nob work under water will it let water in ?
if yes what ha other ppl done to stop this

I have used a finer filter on one of the 3.5's with twin su's so they do exist. I wouldn't recommend them however. I have had two bad experiences with them.

yer it does seem to be the general answer to not use the k&n

i will see when i set it up as its not going on twin sus its going on to a single carb 5ltr with twin snorkels, so it will be running in the exact opposit way but i am still yet to even see what the filters look like ?