Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

80 series coil spring spacers

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 112
Joined: Fri Nov 08, 2002 8:26 am
Location: Maryborough

Contact:
Contact mudlux

80 series coil spring spacers

Post by mudlux »

At the moment I have a 3 inch lift in my 80 series and i'm looking at putting in some 20mm coil spacers. Is this just an easy task or will there be other mods I would need to do to keep it nice to drive?
www.outbackproven.com.au
For all your TUFF outback camping & 4wdriving gear!!!!
Top
Posts: 407
Joined: Wed Aug 20, 2003 10:02 am
Location: Hornsby Sydney

Post by Surfin Alec »

I have OME springs (2.5" lift??) and put some 30mm coil spacers in all round. I had to then do the caster bushes as I had none before. Just made the steering a bit too twitchy and the front sway bar didn't want to fit any more.
GO the 80...The mods have started :-)
Top
Posts: 112
Joined: Fri Nov 08, 2002 8:26 am
Location: Maryborough

Contact:
Contact mudlux

coil spacers

Post by mudlux »

I did the castor bushes when the lift went in so that side of things should be fine, might just put them in and see how they go.

thanks mate..
www.outbackproven.com.au
For all your TUFF outback camping & 4wdriving gear!!!!
Top
Posts: 729
Joined: Sat Aug 07, 2004 11:42 pm
Location: Maitland

Post by revin »

When i enquired about spacers for my 105 I was told I`d need longer shocks also ????
2001 100 series stock as a rock
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 11 guests