Outer Limits 4x4 Board

At the moment I have a 3 inch lift in my 80 series and i'm looking at putting in some 20mm coil spacers. Is this just an easy task or will there be other mods I would need to do to keep it nice to drive?

I have OME springs (2.5" lift??) and put some 30mm coil spacers in all round. I had to then do the caster bushes as I had none before. Just made the steering a bit too twitchy and the front sway bar didn't want to fit any more.

I did the castor bushes when the lift went in so that side of things should be fine, might just put them in and see how they go.

thanks mate..

When i enquired about spacers for my 105 I was told I`d need longer shocks also ????