Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
What jets and power valve
Moderators: toaddog, Elmo, DUDELUX
What jets and power valve
Just put a 350 holley onto my 3F cruiser, its got 45 powervalve with 60 jets and its rus like shit. Any suggestions on what size to run.
FJ73 2inch lift climax shackles, 2inch body lift, 33 muddies
What did the Holley come off? Im guessing something with a large camshaft as the 45 power valve opens at a higher vacum than standard.
THe std power valve should be a 65 and as for the jetting have you pulled a plug and checked if it is rich? It may have a air leak somewhere causing the running crap, also check the adapter for air leaks.
THe std power valve should be a 65 and as for the jetting have you pulled a plug and checked if it is rich? It may have a air leak somewhere causing the running crap, also check the adapter for air leaks.
Who is online
Users browsing this forum: No registered users and 1 guest