First 10 spline axle breakage
Posted: Wed Dec 31, 2003 4:10 pm
I finally did it, broke my first set of 10 spline axles.
I would weigh this up on the newly fitted 235/85R16 MT/R's and that ARB air locker. The locker and diff center are fine, but the axles twisted off without too much help. Was trying to conquer a nasty hill at Ormeau and almost made it and 'bang' , so it was white knuckling experience getting back ALL the way down to the bottom!!
Broke that one there, but the easy way round, broke the other. I would say I did it when I did the first one, but it was still hanging on by a thread and agrivated it and broke without too much stress.
Anyway, got another set from Vic (every bastard in QLD wants too much for them, cheaper to have them trucked up here!!). See how long this set last
Anyway, happhy new year to all.
Trav
I would weigh this up on the newly fitted 235/85R16 MT/R's and that ARB air locker. The locker and diff center are fine, but the axles twisted off without too much help. Was trying to conquer a nasty hill at Ormeau and almost made it and 'bang' , so it was white knuckling experience getting back ALL the way down to the bottom!!
Broke that one there, but the easy way round, broke the other. I would say I did it when I did the first one, but it was still hanging on by a thread and agrivated it and broke without too much stress.
Anyway, got another set from Vic (every bastard in QLD wants too much for them, cheaper to have them trucked up here!!). See how long this set last
Anyway, happhy new year to all.
Trav