Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Holden 253 spigot bush

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 35
Joined: Sat Apr 09, 2005 11:49 pm
Location: IPSWICH

Holden 253 spigot bush

Post by MYLUX »

Hey, I have a Holden 253 red motor, going into my hilux, the spigot bush that comes standard in the motor is too big for the hilux output shaft spigot, is there a bearing that will fit or do i have to machine a bronze bush to fit.

Thanks Matt
hilux, V8, duals, RUF, hi steer, detroit front and rear lockers, 4.88's, 37" Boggers.
Top
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

Maybe call castlemaine rod shop or make one out of phosfer Bronze ? the spelling on that another thing to try is get both the OD of the shaft and the ID of the crank and go and see what cbc have or can get.
plenty of parts on the bench
Top
Posts: 98
Joined: Mon Apr 17, 2006 3:09 pm
Location: Moorooduc, Mornington Peninsula VIC

Post by Tuflux308 »

any conversion place should have the adaptor washer that fits in the holden fly wheel, uses the standard hilux spigot bearing, just tap the spacer in to the flywheel and then fit the standard bearing, easy job.
gq wagon now a gq ute, straight gas tb42 with a thing on the side that makes it go fast
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 64 guests