Page 1 of 1
d2 hubs on d1
Posted: Mon Aug 20, 2007 1:04 pm
by advdisco1
will disco2 hubs/rotors bolt on to a disco1. would like to choose from a better range of rims and get vented front brakes.
Posted: Mon Aug 20, 2007 1:44 pm
by Loanrangie
There is actually a better range of rims for D1's, as all RRC, series 1/2/3, county, defender rims fit. D2 steel rims are like rocking horse poo and the alloys are $$$ to buy. They use totally different hubs so wont fit without a lot of work.
Posted: Mon Aug 20, 2007 3:55 pm
by Reddo
LoanRangie is correct, and you can get vented disk brakes to fit if you want to, eg., get some Defender calipers or Rangie Classics
Posted: Mon Aug 20, 2007 10:57 pm
by andrew e
you can also get hub adaptors from a series 1 to a series 2. Im assuming its to run 18+ rims? These are available special order form karcraft in silverwater, and they aren't cheap. Oh and they're illegal to use on australian roads (but ok on pommy ones).
Andy
Posted: Thu Aug 23, 2007 6:06 pm
by advdisco1
want to run 285x55x20" for around town. would prob. need some spacers to to clear inner guard