Can anyone tell me if 33s will fit a Ln106 with a 2in spring lift with out to many issues.
Thanks
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
33s on hilux
Moderators: toaddog, Elmo, DUDELUX
will definately hit the guards on the front and maybe on the rear. I have 4" lift and they still hit (on the front, and thats with the diff moved forward)
Go a 2" body lift with the spring lift you already have and it should be not too bad... cheap and easy too.
Go a 2" body lift with the spring lift you already have and it should be not too bad... cheap and easy too.
3.0L turbo diesel, 4" lift, bud's front housing, track assasin cv's, air lokker front + Rear, beadlock'd 37 stickies, high steer, 15.5" travel ranchos, high pinion diff and coils on the rear
ok
i have 2" susp and 2" b/lift with 32x11.5s and it scrubs occasionally.The 2 inch bodylift was simple.fuel filler hoses need moving,handbrake line under floor on mine also and some people say the steering shaft needs loosening to travel up the spline.apart from that i cant think of much that i had to do.Mine sometimes pops out of 2nd since the lift also,i think they just bend the stick or cut a bigger hole in the floor......cheers matt
sierra truggy,37 sticky treps,propane,6.5s and disconnect,lux diffs with spools,16" fox shox,hydro steer.
hey guys
to stop it jumping out of second and make it easier to get into reverse, take off your gear box boot where the selectors come through, there will be two boots there like one inside another, take off the one inside the outer boot and it should fix the gear selector issue,
well it fixed mine anyways, i also had to bend my mount where my clutch line mounts just so the line isn't tight.
troy
to stop it jumping out of second and make it easier to get into reverse, take off your gear box boot where the selectors come through, there will be two boots there like one inside another, take off the one inside the outer boot and it should fix the gear selector issue,
well it fixed mine anyways, i also had to bend my mount where my clutch line mounts just so the line isn't tight.
troy
its just a scratch, she'll buff out
BOONDALL BACKYARD PERFORMANCE
BOONDALL BACKYARD PERFORMANCE
personally i wouldnt put 33's on without more suspension lift or at least a body lift, put mine on before the body lift and they destroyed my guards 
lol now it makes some serious noises out of them. there is a mountain of info on body lifts if u search. even 32's scrubbed lightly before the body lift. just my experince.
ps. mine jumps out of second occasionly too not big drama but.
lol now it makes some serious noises out of them. there is a mountain of info on body lifts if u search. even 32's scrubbed lightly before the body lift. just my experince.ps. mine jumps out of second occasionly too not big drama but.
Who is online
Users browsing this forum: No registered users and 1 guest