Hi guys l have fitted manual hubs and changed the ADD diff for a Hilux front diff with no ADD.
The problem is l joined the 2 wires together that went to the detection switch on the diff when joined the 4wd light comes on with the button pushed in or out, and then can't get it to turn off.
Also now l can't get it out of 4WD as the front tailshaft is spinning all the time instead of being disengaged in H4 button in or out.
Not sure what the problem is, l have seen mentioned on here about the 4WD fuse 20 amp but cannot find it. Also have blocked off the vacuum lines for the ADD not sure if this would cause a problem.
Please help l need it fixed by tonight as going out tomorrow morning with a big group and it sucks if l can't go as l am the organiser.
Cheers Chris
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
PLEASE HELP!!!!!!
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Resident Terrorist
The computer works it out like this.
When you press the 4wd button it locks the transfer in. It has a synchro so spins up fine. Once that switch detects it is engaged it triggers the vacuum solenoig to lock in the ADD. Once the ADD is in the switch on it tells the computer it all happening, and lights the dash.
Unlock is the exact reverse. If it thinks the diff is still locked in, it won't unlock the transfer case. It insists on the diff locking / unlocking first as it has no synchro's and the vacuum actuator is not particularly forceful.
I dont have a wiring digram to figure out how to bodgy it, and if the control system is electronic or relays.
One way would be to fool the thing by routing the switch to the interior on your dash, but that's not a particularly elegant solution.
The Yahoo Surf list may have more info. Personally I liked the ADD system despite early misgivings.
Paul
When you press the 4wd button it locks the transfer in. It has a synchro so spins up fine. Once that switch detects it is engaged it triggers the vacuum solenoig to lock in the ADD. Once the ADD is in the switch on it tells the computer it all happening, and lights the dash.
Unlock is the exact reverse. If it thinks the diff is still locked in, it won't unlock the transfer case. It insists on the diff locking / unlocking first as it has no synchro's and the vacuum actuator is not particularly forceful.
I dont have a wiring digram to figure out how to bodgy it, and if the control system is electronic or relays.
One way would be to fool the thing by routing the switch to the interior on your dash, but that's not a particularly elegant solution.
The Yahoo Surf list may have more info. Personally I liked the ADD system despite early misgivings.
Paul
Lexus LX470 - hrrm Winter Tyres
Gone - Cruiser HZJ105 Turbo'd Locked & Lifted
Gone - 3L Surf
Gone - Cruiser HZJ105 Turbo'd Locked & Lifted
Gone - 3L Surf
Who is online
Users browsing this forum: No registered users and 3 guests