Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Holden Frontera measurments

Tech talk for GMH/Isuzu and Great Wall owners

Moderator: Moderators

Forum rules
Post Reply
Posts: 260
Joined: Thu Nov 25, 2004 10:23 pm
Location: Newcastle

Holden Frontera measurments

Post by FRN-71E »

Need to know the free standing height of standard rear coils out of a 95 to 98 Holden Frontera, And also the height between the ground the top of the wheel arch? if anyone can help that would be great


cheers mitch
Top
Posts: 10
Joined: Sun Jun 03, 2007 3:15 pm

Post by thefrog »

Mate not sure about the spring heights, but i know the wheel arch heights are 515 for the front and 520 for the rear.
Top
Posts: 260
Joined: Thu Nov 25, 2004 10:23 pm
Location: Newcastle

Post by FRN-71E »

thefrog wrote:Mate not sure about the spring heights, but i know the wheel arch heights are 515 for the front and 520 for the rear.
Mate that cant be right. From the ground up 520mm is way to low..
Top
Posts: 10
Joined: Sun Jun 03, 2007 3:15 pm

Post by thefrog »

yeh mate, my bad, i think it must be from the centre of the hub 2 the wheel arches.
Top
Posts: 260
Joined: Thu Nov 25, 2004 10:23 pm
Location: Newcastle

Post by FRN-71E »

thefrog wrote:Mate not sure about the spring heights, but i know the wheel arch heights are 515 for the front and 520 for the rear.

I measured from the centre of the hubs to the archs and got
Front : 620 and Rear : 635 , a nice 4inchs over standards!
Top
Posts: 10
Joined: Sun Jun 03, 2007 3:15 pm

Post by thefrog »

with 4 inches lift u must hav a spring and bodylift?
Top
Posts: 260
Joined: Thu Nov 25, 2004 10:23 pm
Location: Newcastle

Post by FRN-71E »

thefrog wrote:with 4 inches lift u must hav a spring and bodylift?
Yer i do mate, got new coils coil spacers and 1inch body lift
Top
Posts: 10
Joined: Sun Jun 03, 2007 3:15 pm

Post by thefrog »

wat sized tyres r u runnin, ive got a spring lift and am runnin 31x10.5 on toyota hilux offset
Top
Posts: 260
Joined: Thu Nov 25, 2004 10:23 pm
Location: Newcastle

Post by FRN-71E »

thefrog wrote:wat sized tyres r u runnin, ive got a spring lift and am runnin 31x10.5 on toyota hilux offset
hahah at the moment standard allys with 265/70r16's .. but will be running 33x12.5r15s on lancrusier offset.. when i get around to it.. and going to do a 2inch body lift too
Top
Post Reply

Return to “Dmax / Isuzu / Holden / Great Wall”

Who is online

Users browsing this forum: No registered users and 0 guests