Page 1 of 1
Holden Frontera measurments
Posted: Wed Aug 29, 2007 2:51 pm
by FRN-71E
Need to know the free standing height of standard rear coils out of a 95 to 98 Holden Frontera, And also the height between the ground the top of the wheel arch? if anyone can help that would be great
cheers mitch
Posted: Mon Sep 10, 2007 3:26 pm
by thefrog
Mate not sure about the spring heights, but i know the wheel arch heights are 515 for the front and 520 for the rear.
Posted: Mon Sep 10, 2007 3:49 pm
by FRN-71E
thefrog wrote:Mate not sure about the spring heights, but i know the wheel arch heights are 515 for the front and 520 for the rear.
Mate that cant be right. From the ground up 520mm is way to low..
Posted: Tue Sep 11, 2007 12:58 am
by thefrog
yeh mate, my bad, i think it must be from the centre of the hub 2 the wheel arches.
Posted: Sun Sep 16, 2007 8:00 pm
by FRN-71E
thefrog wrote:Mate not sure about the spring heights, but i know the wheel arch heights are 515 for the front and 520 for the rear.
I measured from the centre of the hubs to the archs and got
Front : 620 and Rear : 635 , a nice 4inchs over standards!
Posted: Mon Sep 17, 2007 10:10 pm
by thefrog
with 4 inches lift u must hav a spring and bodylift?
Posted: Tue Sep 18, 2007 9:42 am
by FRN-71E
thefrog wrote:with 4 inches lift u must hav a spring and bodylift?
Yer i do mate, got new coils coil spacers and 1inch body lift
Posted: Thu Sep 27, 2007 6:08 pm
by thefrog
wat sized tyres r u runnin, ive got a spring lift and am runnin 31x10.5 on toyota hilux offset
Posted: Thu Sep 27, 2007 6:15 pm
by FRN-71E
thefrog wrote:wat sized tyres r u runnin, ive got a spring lift and am runnin 31x10.5 on toyota hilux offset
hahah at the moment standard allys with 265/70r16's .. but will be running 33x12.5r15s on lancrusier offset.. when i get around to it.. and going to do a 2inch body lift too