Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Stuck in swamp now alternator buggered

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 7
Joined: Thu Aug 23, 2007 10:25 am
Location: Brisbane

Stuck in swamp now alternator buggered

Post by 1Bandit1 »

G'day all,

First time poster long time reader, I was out today and got stuck in a mud hole had muddy water all through the engine bay and everywhere else for that matter, got towed out and noticed a belt started smoking then snapped, got the hilux home and it seems the alternator packed it in and chewed the belt out and snapped it, its a 94 dual cab 2.8 diesel.

Does the alternator pack it in usually if it goes underwater?
Is there anyway of trying to repair or free it up myself?
Where to get a replacement/reco and what sort of price would i be looking at?

Thanks all in advance, just a bit worried coz i was told that it will probly cost be around 800 bucks for a reco, damn expensive alternator.

Cheers
Bandit
Posts: 210
Joined: Wed May 16, 2007 7:10 pm
Location: Geelong

Post by VKYOOT »

sounds like u mighta clogged it with mud which caused it to stop spinning?

Take it off and take the case off and have a looksie.
Posts: 2601
Joined: Tue Jul 13, 2004 8:02 pm
Location: warner, brisbane

Post by chunderlicious »

ok 120 is about normal price for a toyota hilux alternator. they get buggered when they get mud in them. give it a light tap with a plastic hammer. just like tapping something for fun when your bored kind of hard. but just get it re done.

do toyota alts. always blow easily, everyone ive seen has done it easy. nissan ones can take a good solid muddy soaking and still run fine. whats the deal.
turbos are nice but i'd rather be blown
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

chunderlicious wrote:ok 120 is about normal price for a toyota hilux alternator. they get buggered when they get mud in them. give it a light tap with a plastic hammer. just like tapping something for fun when your bored kind of hard. but just get it re done.

do toyota alts. always blow easily, everyone ive seen has done it easy. nissan ones can take a good solid muddy soaking and still run fine. whats the deal.
Its a diesel Alternator they are totaly different to a petrol Hilux. They can get expensive.

As others said pull it off give it a good soaking in clean water and see if you can get movement out of it. It will prob need a couple of bearings and a set of brushes. The brushes usually require some soldering to change them. They are not a very complex alternator to rebuild. As long as you have reasonable mechanical skills. If the armiture is damaged(centre section with all the wire wraped around it) then you would be better off lokking for a reco or second hand one.
Posts: 173
Joined: Wed Nov 30, 2005 1:49 pm
Location: Brisbane

Post by OISTA »

I got mine done (out of petrol cruiser) For 80 bucks. They put in new bearings and brushes, and mabye a diode? Got it done at Everton Auto Electrics, on Timms rd
We've rolled the Rover over, over.
Posts: 1344
Joined: Thu Jan 12, 2006 10:12 am
Location: sydney

Post by sniper »

Im always killing alternators :bad-words:

Mud is your worst enemy with them.
LANDCRUISER GXL 80series 4.2TD
[url=http://www.rag4x4.com]R.AG. 4X4 Club
RUFF~AS~GUTS[/url]
Posts: 70
Joined: Fri May 11, 2007 4:26 pm
Location: Central Coast, NSW

Post by Brainless »

i havnt blown mine yet but everytime i get out of the bush i flush the alternator out with fresh water as its always getting crap in it
87 Hilux SingleCab Project - 3rz, 35's 3inch Spring, 3 inch Body, GB Lift
88 Ford Mav, 4inch Spring, 3inch Body
User avatar
DEZ
Posts: 205
Joined: Sun Apr 01, 2007 8:45 pm
Location: sydney

Post by DEZ »

yeah my hiliux was bogged bonnet deep for about an hour and yeah buggerd as ended up just gettin one from repco was about 350 and was all good.
95 GQ td42
3"lift 33 claws
covered in mud
Posts: 7
Joined: Thu Aug 23, 2007 10:25 am
Location: Brisbane

Post by 1Bandit1 »

Ok got it out, what a pain in the arse spot its in.

It is full of crap but the nuts holding the case together are stripped, question is about this vacume setup on it is there suppose to be oil coming out of it? i would have assumed vacum as air not oil?

Cheers
Bandit
Posts: 2944
Joined: Tue Feb 11, 2003 5:47 pm
Location: Manjimup, Western Australia

Post by ausyota »

1Bandit1 wrote:Ok got it out, what a pain in the arse spot its in.

It is full of crap but the nuts holding the case together are stripped, question is about this vacume setup on it is there suppose to be oil coming out of it? i would have assumed vacum as air not oil?

Cheers
Bandit
The vac pump has an oil feed and drain to the motor as well as a vac line.
R.I.P Brock Fontanini 28-3-06 - 16-2-08
www.teamcarnage.net
Posts: 422
Joined: Wed Nov 22, 2006 1:47 pm
Location: surf coast, victoria

Post by cruiser60series »

1Bandit1 wrote:Ok got it out, what a pain in the arse spot its in.

Cheers
Bandit
yeah you think toyota would put it in a more accessible spot seeing as it is a part that gets changed more regularly than most things on a car, more so than powersteering pumps and that. the oil is just to lube up the vac pump i think.
At first I thought it was a sea anemone, upon closer inspection I realised it was a funky ball of tits from outer space.
Posts: 7
Joined: Thu Aug 23, 2007 10:25 am
Location: Brisbane

Post by 1Bandit1 »

G'day all,

I have taken everything i can see removeable off the alternator, pump, brushes and all contact section off the back yet still cant seem to get the case apart to give a full clean, Got hold of a reco one am putting that in and going to keep working on the otherone as i flushed it out and have gotten a fair bit of movement back. want to keep as a spare.

Question is with the reco one before i put it in is there anything i can do to prevent this from happening again? was thinking of somehow affixing a type of mesh over all the areas that crap can get into it, or was i just unlucky for this to happen and i shouldnt worry about it even though im hooked on playing in muddy swamps.

Cheers Bandit
Posts: 2601
Joined: Tue Jul 13, 2004 8:02 pm
Location: warner, brisbane

Post by chunderlicious »

dont play in muddy swamps unless you like redoing them all the time. as i said ive seen so many toyota alts die when ive seen patrol ones get dirtier and more wet and survive.
turbos are nice but i'd rather be blown
Posts: 5179
Joined: Fri Dec 05, 2003 8:15 pm
Location: Brisbane Australia

Post by Shadow »

chunderlicious wrote:dont play in muddy swamps unless you like redoing them all the time. as i said ive seen so many toyota alts die when ive seen patrol ones get dirtier and more wet and survive.
must be the nissan part number on the bosch/denso altenator that makes the difference :roll:
Posts: 2601
Joined: Tue Jul 13, 2004 8:02 pm
Location: warner, brisbane

Post by chunderlicious »

lol, must be. but ive done winch and alts didnt seem to struggle at all. after 4 rounds in water and mud. drown the lux once just above the wheels (31s) and it stopped working completely... happened twice.
turbos are nice but i'd rather be blown
Posts: 158
Joined: Fri Jun 03, 2005 7:30 am
Location: South Brisbane

Post by Yumsylux »

Shadow wrote:
chunderlicious wrote:dont play in muddy swamps unless you like redoing them all the time. as i said ive seen so many toyota alts die when ive seen patrol ones get dirtier and more wet and survive.
must be the nissan part number on the bosch/denso altenator that makes the difference :roll:
Love your work shadow. Spot on. Must be a bosch thing they must have it in for Toyota...
Post Reply

Who is online

Users browsing this forum: No registered users and 91 guests