Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Spot weld on front axle

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 314
Joined: Thu Aug 16, 2007 6:29 pm
Location: RANDWICK

Spot weld on front axle

Post by teambullet »

Hi all, any of you guys able to help with following question.
On the hilux, i used to rn the same axles all the time and just change the cvs when they broke. I used to have a spot weld on the axle 40mm in from the diff end. This used to stop axle moving around and therefore didnt need inner circlip.
Question is, anyone running a 75 or 75front end that does the same, cause im after the measurement of the spot weld???
Thanks Denny
R.I.P SILVER BULLET.
TOW RIG D4D 2011 LUX ON 33s. COMP RIG 95 SIGLE CAB LUX
SPONSORS EASTCOAST 4WD EASTSIDE AUTO KAR PRO TYRE AND AUTO
TECH ENGINEERING
Top
Posts: 3099
Joined: Wed Dec 11, 2002 10:55 am
Location: Central Queensland

Post by BundyRumandCoke »

Surely there is a wear mark on the splines that would indicate how far in the axle has been running in the diff.
Mud makes excellent toothpaste.
Top
Posts: 433
Joined: Tue Nov 16, 2004 6:24 pm
Location: Medowie NSW

off topic

Post by HIGH ROLLER »

Off topic love your avatar BundyRumandCoke
TEAM PIRATE navi Tuff Truck 2010 Winners!!!!!
Dreaming of getting back to KOH
Top
Posts: 2820
Joined: Sun May 25, 2003 10:04 am
Location: Redbank Plains, QLD

Post by Daisy »

BundyRumandCoke wrote:Surely there is a wear mark on the splines that would indicate how far in the axle has been running in the diff.
yup thats how we did it...

Use a piece of angle and lay it just past the wear line and put a spot weld there and clean it up afterwards.
custom bar work, 4x4 parts, trailers, anything out of steel/alloy :D
Top
Posts: 314
Joined: Thu Aug 16, 2007 6:29 pm
Location: RANDWICK

Axle spot weld

Post by teambullet »

All good thanks guys. worked out to be the same distance as the hilux.
Thanks Denny
R.I.P SILVER BULLET.
TOW RIG D4D 2011 LUX ON 33s. COMP RIG 95 SIGLE CAB LUX
SPONSORS EASTCOAST 4WD EASTSIDE AUTO KAR PRO TYRE AND AUTO
TECH ENGINEERING
Top
Posts: 7230
Joined: Mon Oct 21, 2002 10:42 pm
Location: Brisbane

Post by MissDrew »

Or you fill the splines up with greese, slip axle back in till the oil seal and oil seal seat line up, then remove axle, measure the distance that the splines have gone in, clean it all up then weld.

It doesn`t really matter if the axle moves around, its more done to keep the oil seal and the oil seal seat on the axle lined up so it doesn`t all leak.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 2 guests