Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

MK Gearbox Conversions

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 16
Joined: Sat Jun 10, 2006 5:12 pm

MK Gearbox Conversions

Post by MQfishbucket »

Have an '84 MK SWB, L28, 4spd manual. The clutch died today.
Wondering how to replace it, and/or if i can very easily slot in a 5spd manual MK box off a diesel or later petrol, or an auto box of the same age.
If anyone still drives these things or makes it their business to know about them, then your advice would be very much appreciated. Cheers.
Posts: 2072
Joined: Sun Feb 11, 2007 4:50 pm
Location: Hobart

Re: MK Gearbox Conversions

Post by macca81 »

MQfishbucket wrote:Have an '84 MK SWB, L28, 4spd manual. The clutch died today.
Wondering how to replace it, and/or if i can very easily slot in a 5spd manual MK box off a diesel or later petrol, or an auto box of the same age.
If anyone still drives these things or makes it their business to know about them, then your advice would be very much appreciated. Cheers.

im fairly sure lotsa ppl still drive these things.....



to the best of my knowledge, the 5spd bolts straight up with no problems. yet to do this myself to give you a definate but from all acounts you should have no probs should you go down this path. (rumor has it that marks has a 5spd that has a lower 1st and higher 5th than stock, im looking into it atm coz alower 1st would be tops, if ya can get that then do so)
[quote="Barnsey"]
Bronwyn Bishop does it for me.[/quote]
Posts: 965
Joined: Fri Mar 26, 2004 10:09 am
Location: B.F.E

Post by RMP&O »

You need the 5spd from an L28 or at least the bellhousing. But I think you need the whole thing because of the top cover, mounts, ect. 5spd is longer so it won't just bolt right in.

Marks never made a 5spd for the MQ/MK's. They made a 5spd for the G60's which was a custom cast box with Nissan Cabstar guts.
www.rmp-o.com
Posts: 16
Joined: Sat Jun 10, 2006 5:12 pm

Post by MQfishbucket »

Thanks guys. So basically I'll need a wreck or something to do a 5spd conversion, as I'll need driveshafts and all if its longer than a 4spd. What about an auto swap?
Posts: 3523
Joined: Fri Aug 27, 2004 12:27 am
Location: Fairfield,Sydney

Post by pongo »

MQfishbucket wrote:Thanks guys. So basically I'll need a wreck or something to do a 5spd conversion, as I'll need driveshafts and all if its longer than a 4spd. What about an auto swap?
Where abouts are you, are you near sydney ?
Posts: 215
Joined: Sat Aug 30, 2003 4:26 pm
Location: The Alice/Adelaide

Post by Vanne »

Oh, and we definiatly /STILL/ drive the old busses around :)
wouldent sell mine for quids!
85 MK lwb 3.3td 2 inch body lift, 32inch simex Ironman 2 inch suspension lift. 4 tonne on the clock, original donk.
Posts: 1949
Joined: Wed Oct 23, 2002 7:44 am
Location: Melbourne, Australia

Post by MKPatrolGuy »

Marks did do an adaptor to fit a Nissan Cabstar 5 speed to the MQ/K transfercase. The Cabstar box had a very low 1st gear but the adaptor is no longer in production.
[size=100][url=http://www.vickrawlers.com/]VicKrawlers.com[/url]
[url=http://www.drfwdc.org.au/]Dandenong Ranges 4wd Club[/url][/size]
Posts: 16
Joined: Sat Jun 10, 2006 5:12 pm

Post by MQfishbucket »

Actually i'm in perth. Guess that explains why I have the impression not many are left- less people, less cars in general, less old patrols. I can probably remember seeing about 5 on the road since I got interested in them, and saw mine driving around before i got it out of the newspaper. Their scarcity in no way diminishes their greatness though. So can i simply bolt on an auto from a similar model, or do they need different bellhousings and driveshafts like the 5spd?
Posts: 2072
Joined: Sun Feb 11, 2007 4:50 pm
Location: Hobart

Post by macca81 »

imfrom hobart, with even less ppl, and i cant go a single day without seeing half a dozen of them...
[quote="Barnsey"]
Bronwyn Bishop does it for me.[/quote]
Posts: 7
Joined: Wed Nov 08, 2006 10:00 pm

Post by chabby »

The L28 Cabstar 5 speed fits the MQL28 ...the only mod required is to shorten the propshaft.
check www.nissan4x4.co.za
"I am a simple man"
Posts: 1949
Joined: Wed Oct 23, 2002 7:44 am
Location: Melbourne, Australia

Post by MKPatrolGuy »

chabby wrote:The L28 Cabstar 5 speed fits the MQL28 ...the only mod required is to shorten the propshaft.
check www.nissan4x4.co.za
And get the adaptor that Marks no longer make to fit it to the transfercase.
[size=100][url=http://www.vickrawlers.com/]VicKrawlers.com[/url]
[url=http://www.drfwdc.org.au/]Dandenong Ranges 4wd Club[/url][/size]
Posts: 16
Joined: Sat Jun 10, 2006 5:12 pm

Post by MQfishbucket »

chabby wrote:The L28 Cabstar 5 speed fits the MQL28 ...the only mod required is to shorten the propshaft.
check www.nissan4x4.co.za
Call me stupid, I can't find a thread on the matter (great site for nissans though). Don't want to start a fight, but do I or don't I need an adaptor?
Posts: 7
Joined: Wed Nov 08, 2006 10:00 pm

Post by chabby »

Contact these dudes they are in Auzzy anyway and have done this conversion http://www.dellowauto.com.au/main.html
"I am a simple man"
Posts: 292
Joined: Sat Apr 29, 2006 2:32 pm
Location: New Zealand

Post by David_S »

I have done the conversion from 4 speed to 5 speed on a P40 engine using the 5 speed from a SD33. This is reasonably straightforward as the bell housings are the same. But issues which arose were.

1) Longer front, shorter rear drive shafts
2) Longer handbrake cable
3) Longer speedo cable
4) Transfer lever fouled floorpan and had to be "bent"
5) New or modified rear gearbox mounts
6) Possible extension to 4wd and reversing indicator light leads
7) Front driveshaft fouls chassis crossmember. Some cutting and welding required to get around this.
8) Flywheel spigot bearing had to be modified to suit the smaller diesel gearbox mainshaft. Mainshaft had to be shortened to suit P40

This conversion was relatively straightforward as the P40 and SD33 bell housings are the same. According to my Parts book the L28 bell housing is different - not sure where as I have never seen one but possibly length or bolt patterns. You would need to check this and the dia and length of the gearbox main shaft which fits into the spigot bearing. P40 and SD33T clutches are larger than the L28 and SD33 which might affect the bell housing size.

There were two 5 speed boxes fitted to MQ/MK Nissans the later one having lower first and reverse gears (1st gear 3.897 and 4.222)

Can't help with auto conversion but suspect it would be more complicated. Parts book only lists one housing for the torque converter though.

Cheers, David
1982 Patrol K160 SWB (MQ) 4L P40 Petrol with Megasquirt fuel injection and EDIS ignition. Warn 8274 winch with Gigglepin head
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest