Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

exhaust pics

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 368
Joined: Tue Jan 18, 2005 12:06 am
Location: scotland

exhaust pics

Post by lexi »

Anyone got pics of exhaust arrangment from undrneath truck on a Turboed TD42 gq? One with mufflers or without. without. 2 1/inch or 3"

Any help much appreciated.

Alex
Top
Posts: 1949
Joined: Wed Oct 23, 2002 7:44 am
Location: Melbourne, Australia

Post by MKPatrolGuy »

I will try and get some this arvo for you. Mine is booked I for 8:30am today to get a Mandrel bent 3" with no mufflers.

Dave
[size=100][url=http://www.vickrawlers.com/]VicKrawlers.com[/url]
[url=http://www.drfwdc.org.au/]Dandenong Ranges 4wd Club[/url][/size]
Top
Posts: 368
Joined: Tue Jan 18, 2005 12:06 am
Location: scotland

Post by lexi »

Excellent Dave!

Alex
Top
Posts: 160
Joined: Sat Jul 01, 2006 8:03 pm

Post by bigbennymq »

how much did the zorst set u back thanks mate
Top
Posts: 368
Joined: Tue Jan 18, 2005 12:06 am
Location: scotland

Post by lexi »

Can anyone else stick a digi under their truck while showing of their flex.

I betch Daves motor is still on the ramp :D

Alex
Top
Posts: 1949
Joined: Wed Oct 23, 2002 7:44 am
Location: Melbourne, Australia

Post by MKPatrolGuy »

bigbennymq wrote:how much did the zorst set u back thanks mate
$250 from under the drivers seat to the back, with 2 flanges fitted.
[size=100][url=http://www.vickrawlers.com/]VicKrawlers.com[/url]
[url=http://www.drfwdc.org.au/]Dandenong Ranges 4wd Club[/url][/size]
Top
Posts: 1949
Joined: Wed Oct 23, 2002 7:44 am
Location: Melbourne, Australia

Post by MKPatrolGuy »

lexi wrote:Can anyone else stick a digi under their truck while showing of their flex.

I betch Daves motor is still on the ramp :D

Alex
Sorry, if it stops raining I'll get some pics today. Ended up having to rebuild the back brakes on Dad's Patrol yesterday.

Dave
[size=100][url=http://www.vickrawlers.com/]VicKrawlers.com[/url]
[url=http://www.drfwdc.org.au/]Dandenong Ranges 4wd Club[/url][/size]
Top
Posts: 160
Joined: Sat Jul 01, 2006 8:03 pm

Post by bigbennymq »

MKPatrolGuy wrote:
bigbennymq wrote:how much did the zorst set u back thanks mate
$250 from under the drivers seat to the back, with 2 flanges fitted.
Ey mate how much u reckon it would be to get it done from the motor back right through thanks
benny
Top
Posts: 368
Joined: Tue Jan 18, 2005 12:06 am
Location: scotland

Post by lexi »

Come on guys who has a straight through exhaust or one muffler on a Turboed TD42. Snap it with digi. Need to see route of tubes etc. Thanks
Alex
Top
Posts: 1143
Joined: Thu May 13, 2004 5:27 pm
Location: Quirindi, NSW

Contact:
Contact bushy555

Post by bushy555 »

Bored at work....
3" straight thru exhaust from DTS (MTQ) in Sydney which came with their turbo and intercooler kit.
Think it is bent for a muffler half way inbetween - near the gearbox - and the big loop is to go over the top of the rear diff housing, but I made the loop to loop up around near the rear tailshaft front uni joint/hand brake housing without having to cut and re-weld. Had to cut/re-weld the rear six inches to drop the outlet by a little bit.
Has been on now for just under two years. 60,000 klicks and no drama's.

ImageImageImage
ImageImageImage
Image

Exhaust exits above and about a foot in from the rear passenger tyre.
'99 GU ute.
Bushies: http://www.angelfire.com/on4/bushy5560/ http://www.angelfire.com/on4/bushy5561/
Lightforce HID conversion stuff: http://www.angelfire.com/on4/bushy5551/
Top
Posts: 368
Joined: Tue Jan 18, 2005 12:06 am
Location: scotland

Post by lexi »

Thanks heaps mate.

Alex
Top
Posts: 1949
Joined: Wed Oct 23, 2002 7:44 am
Location: Melbourne, Australia

Post by MKPatrolGuy »

Will get some pics tomorrow for you.
[size=100][url=http://www.vickrawlers.com/]VicKrawlers.com[/url]
[url=http://www.drfwdc.org.au/]Dandenong Ranges 4wd Club[/url][/size]
Top
Posts: 592
Joined: Wed Apr 19, 2006 8:19 pm
Location: ipswich

Post by rover1 »

random GU pic
Image
cheers Pete.

its the skinny pedal
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 6 guests