Page 1 of 1
exhaust pics
Posted: Sun Sep 09, 2007 7:26 pm
by lexi
Anyone got pics of exhaust arrangment from undrneath truck on a Turboed TD42 gq? One with mufflers or without. without. 2 1/inch or 3"
Any help much appreciated.
Alex
Posted: Mon Sep 10, 2007 8:07 am
by MKPatrolGuy
I will try and get some this arvo for you. Mine is booked I for 8:30am today to get a Mandrel bent 3" with no mufflers.
Dave
Posted: Mon Sep 10, 2007 9:20 am
by lexi
Excellent Dave!
Alex
Posted: Mon Sep 10, 2007 7:40 pm
by bigbennymq
how much did the zorst set u back thanks mate
Posted: Tue Sep 11, 2007 6:50 am
by lexi
Can anyone else stick a digi under their truck while showing of their flex.
I betch Daves motor is still on the ramp
Alex
Posted: Tue Sep 11, 2007 8:11 am
by MKPatrolGuy
bigbennymq wrote:how much did the zorst set u back thanks mate
$250 from under the drivers seat to the back, with 2 flanges fitted.
Posted: Tue Sep 11, 2007 8:12 am
by MKPatrolGuy
lexi wrote:Can anyone else stick a digi under their truck while showing of their flex.
I betch Daves motor is still on the ramp
Alex
Sorry, if it stops raining I'll get some pics today. Ended up having to rebuild the back brakes on Dad's Patrol yesterday.
Dave
Posted: Tue Sep 11, 2007 7:15 pm
by bigbennymq
MKPatrolGuy wrote:bigbennymq wrote:how much did the zorst set u back thanks mate
$250 from under the drivers seat to the back, with 2 flanges fitted.
Ey mate how much u reckon it would be to get it done from the motor back right through thanks
benny
Posted: Sat Sep 15, 2007 3:50 am
by lexi
Come on guys who has a straight through exhaust or one muffler on a Turboed TD42. Snap it with digi. Need to see route of tubes etc. Thanks
Alex
Posted: Sat Sep 15, 2007 7:58 am
by bushy555
Bored at work....
3" straight thru exhaust from DTS (MTQ) in Sydney which came with their turbo and intercooler kit.
Think it is bent for a muffler half way inbetween - near the gearbox - and the big loop is to go over the top of the rear diff housing, but I made the loop to loop up around near the rear tailshaft front uni joint/hand brake housing without having to cut and re-weld. Had to cut/re-weld the rear six inches to drop the outlet by a little bit.
Has been on now for just under two years. 60,000 klicks and no drama's.
Exhaust exits above and about a foot in from the rear passenger tyre.
'99 GU ute.
Posted: Sat Sep 15, 2007 8:00 pm
by lexi
Thanks heaps mate.
Alex
Posted: Sat Sep 15, 2007 10:38 pm
by MKPatrolGuy
Will get some pics tomorrow for you.
Posted: Sun Sep 16, 2007 12:08 pm
by rover1
random GU pic
