Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Engineers in Sydney

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
AJS
Posts: 79
Joined: Sun Mar 20, 2005 10:51 am
Location: Exmouth WA

Engineers in Sydney

Post by AJS »

Does anyone know of an engineer in Sydney that will even look at a 4" lift on a GQ? I've tried a few from the RTA website but no one seems all that interested.
Posts: 1143
Joined: Thu May 13, 2004 5:27 pm
Location: Quirindi, NSW

Post by bushy555 »

John V does engineering work for Nick Mannell.

Hal ??? also engineers huge lifts. Or at least, used to (hal@4n6xpert.com)
Bushies: http://www.angelfire.com/on4/bushy5560/ http://www.angelfire.com/on4/bushy5561/
Lightforce HID conversion stuff: http://www.angelfire.com/on4/bushy5551/
AJS
Posts: 79
Joined: Sun Mar 20, 2005 10:51 am
Location: Exmouth WA

Post by AJS »

Ta Bushy. Do you have the contact details for John V? PM me if you prefer. Thanks again.
Posts: 32
Joined: Fri Aug 04, 2006 12:54 pm
Location: Albury

Post by slinky mav »

Werner Engineering seem to travel around a bit.

have heard some good feed back about him, and he has had a couple of good plugs in the 4wd monthly


my 2c

Hugh
Posts: 4275
Joined: Thu Dec 19, 2002 2:12 pm
Location: Sydney

Post by ozy1 »

slinky mav wrote:Werner Engineering seem to travel around a bit.

have heard some good feed back about him, and he has had a couple of good plugs in the 4wd monthly


my 2c

Hugh
and a couple of not so good ones, pm me if you want more info,
Posts: 1143
Joined: Thu May 13, 2004 5:27 pm
Location: Quirindi, NSW

Post by bushy555 »

AJS wrote:Ta Bushy. Do you have the contact details for John V? PM me if you prefer. Thanks again.
Sorry - i dont. I just went through Nick Mannell and he organised the booking and stuff.
Bushies: http://www.angelfire.com/on4/bushy5560/ http://www.angelfire.com/on4/bushy5561/
Lightforce HID conversion stuff: http://www.angelfire.com/on4/bushy5551/
Posts: 79
Joined: Sat May 08, 2004 8:56 am
Location: Sydney

Engineers in Sydney

Post by GU_247 »

PM sent
Posts: 16
Joined: Wed Jan 26, 2005 12:05 pm
Location: Brookvale

engineering

Post by 38zook »

Ive delt with both John V ( Consulmotive ) and Werner ( TIC ) they are both very good and they will both pass such mods if done neatly , but i am currently using Werner for our customers for his flexibility
V6 Zook, 37 Irok's, GQ Diffs, Coils, Work in progress.

Mitchell Bros 4x4 & More
16 Chard Rd
Brookvale
NSW 2100

PH: 02 9905 4764

www.mitchellbros.com.au
Posts: 14668
Joined: Mon Aug 29, 2005 7:10 pm
Location: western shitney

Post by j-top paj »

i got mine done at consulmotive.
he is a good bloke, will pass stuff only if its done propery. so if anything is dodgy dont bother
Banzy wrote:Dial up internet.........you'd post something and come back 2 beers later to see if it loaded.
my GU
Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests