I'm looking to lift my 2003 IFS Hilux in the next few months with one of the 4" kits that lowers the front diff 4" with brackets.
I tend to drive with my front hubs locked so my front drive-shaft is always spinning. Am I likely to experience any vibration in my front or rear driveshafts with this much lift?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
4" IFS Lift Vibration?
Moderators: toaddog, Elmo, DUDELUX
G'day,
the only time you will get vibrations if something is worn out, all the geometry stays standard (other than tailshaft angle) so you shouldn't have any issues.
It is probably worth changing the unis if they are old as the increased angle does lessen their life. My current set of unis have been in the car 18 months now.
catcha
Leeham
the only time you will get vibrations if something is worn out, all the geometry stays standard (other than tailshaft angle) so you shouldn't have any issues.
It is probably worth changing the unis if they are old as the increased angle does lessen their life. My current set of unis have been in the car 18 months now.
catcha
Leeham
Bloody IFS bugger who slows down the SAS boys.
www.vickrawlers.com
www.vickrawlers.com
Who is online
Users browsing this forum: No registered users and 0 guests