Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Removing my pitman arm?

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 51
Joined: Mon Jun 20, 2005 7:35 pm
Location: Sydney / Central Coast

Removing my pitman arm?

Post by Mr Emu »

Howdy,
I have a widetrack 89 sierra and wish to change the steering box. Just wondering how people remove the pitman arm from the spline on the steering box? I dont have a puller of any description and it appeares to be a tad seized or rusted on. Ive been soaking it up with the wd 40 for a few days and have used a hammer to. Any tricks??

thanks Ian
Top
Posts: 105
Joined: Wed Jul 09, 2003 9:43 pm
Location: newcastle

Post by PAZZ »

hit the side of it with a hammer while using a prior bar to push it off, or go buy a puller!
chicks dig panel damage
Top
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Contact:
Contact Gwagensteve

Post by Gwagensteve »

Get a puller. It will still take the puller cranked up to breaking point, and a tap with a hammer to get it off.

Another option is to heat one side only with a gas torch. The expansion should loosen it.

IMHO trying to do it with a prybar will be a massive struggle. It might work, eventually, but a puller applies the force in the right direction.

Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Top
Posts: 317
Joined: Thu Jul 19, 2007 11:03 pm
Location: Brisbane

Post by Danzo »

try hiting it back together before trying to seperate it, You might have already tried this? tried and proven with stuborn bolts for me, sometimes they snap :cry: most times it helps release ;)
I hate going to weddings because all the grandma's used to poke me in the ribs saying you're next, you're next. They've stopped doing it since I started doing it to them at funerals.
Top
Posts: 801
Joined: Fri Sep 23, 2005 12:56 pm
Location: Darwin N.T

Post by MUD-PIGSIERRA »

I dropped by a mechanics workshop with the steering box pitman arm still on and had it pushed of nicely with a hydraulic press, maybe a better option if its a drop pitman arm your trying to swap over with out damaging....
..wrench, wheel, wreck repeat..

check out the action @ http://www.darwin4x4.net
Top
Posts: 191
Joined: Sat Jul 28, 2007 12:43 pm
Location: Vic

Post by 86slowsierra »

Just buy a Pitman arm puller. keep the recept so if it breaks you can get a refund. It will take alot of force to get off so you might need a breaker bar. If its like mine you will break one of two. you might want to soke the pitman arm in lanotek first to help you.
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 44 guests