Just a quick one.
Where's the timing mark on the TD4.2td 2000 GU cover?
Thanks for any help.
Al.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
TD4.2td timing mark
Adjusting tappet clearances.
Yeah, good one Insane.
Was it you that had said "at about 10.00 o'clock" some time back?
That was it.
If you use a decent torch from underneath, drivers side, you will spot it.
Tappet clearances.
0.35mm inlet and exhaust
Hot.
19mm or 3/4 on the power steering pulley bolt will turn her over (clockwise only).
Tried various forums with out any response.
Hope others can benifit from this info.
Al.
Was it you that had said "at about 10.00 o'clock" some time back?
That was it.
If you use a decent torch from underneath, drivers side, you will spot it.
Tappet clearances.
0.35mm inlet and exhaust
Hot.
19mm or 3/4 on the power steering pulley bolt will turn her over (clockwise only).
Tried various forums with out any response.
Hope others can benifit from this info.
Al.
Who is online
Users browsing this forum: No registered users and 3 guests