Page 1 of 1
TD4.2td timing mark
Posted: Sat Sep 15, 2007 1:08 pm
by GUte
Just a quick one.
Where's the timing mark on the TD4.2td 2000 GU cover?
Thanks for any help.
Al.
Posted: Sat Sep 15, 2007 3:13 pm
by GUte
It's ok I got it done.
Al.
Posted: Sat Sep 15, 2007 6:06 pm
by InSanE
this might be good to put in the bible here is a good pic of the td42 and td42t timing marks on the cover
Adjusting tappet clearances.
Posted: Sat Sep 15, 2007 8:48 pm
by GUte
Yeah, good one Insane.
Was it you that had said "at about 10.00 o'clock" some time back?
That was it.
If you use a decent torch from underneath, drivers side, you will spot it.
Tappet clearances.
0.35mm inlet and exhaust
Hot.
19mm or 3/4 on the power steering pulley bolt will turn her over (clockwise only).
Tried various forums with out any response.
Hope others can benifit from this info.
Al.