Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Vertical crack Im presuming? Weld it up then grind it back flush (use plenty of heat for good penetration), then weld in a fishplate over the cracked section and it should be roses.
Most body shops or 4wd workshops should be able to handle it.
There is a pic of the crack fellers, still recon a weld will hold it???
Thanks a heap.
Yes, clean it up and get a good welder to do a nice over head weld back through it.
Then make sure the link bolt is tightened at ride height. This is a common problem when people lift hiluxs while they are still running the track rod. If you lift it you must loosen both bolts on this link and re-tighten at ride height. Although it sometimes happens on a stock set up as well.
If you need someone to weld it for you talk to Bubs he could fix this easy
