Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Gabriel need pics
Gabriel need pics
Gabriel it's about time we got some pics of these toys that you are building. Your shorty sounds very nice, bit high for my liking but front and rear winches sounds very nice. Only cars in aus I have seen like that are Patrol utes.
Hi guys,
Thank you for your interest in my car...I have to tell you that my car is "under construction!!" since august...and I still have a lot of work to do on it...such as:
- MQ knukles (today I took it from the mechanic shop - I reverse the hooles up side down)
- the steering custom made rods (will be steinless steel, 42 mm diam, 3 wall, inside another bar with 33 diameter, also 3 mm wall). I bought the materials, but I have to machine it...
- the new shocks arrived before christmas, but I took it from the airport on jan 6th. Sway-a-way coilovers, 14" travel, 2.5" diam, w/res. I will replace my existing custom made coil-overs, as this are not good enough (broken easy...;-((. On jan 20th I will go to the factory in order to make the spings...so I'll install it on the car end of this month...
- I have to make the custom cuted prop shaft...as the rear axle is moved now 15 cm back...through the same steinless steel traction arms as will be the tie-rods...plus the fact that I made the arms with johnny joints at both ends (johnny joints that I made it, btw...)
...together with the 4-link triangulated rear susp...
...and thats all what is still pending...plus painting the car (will be Lamborghini Orange..
...did I forget to tell you that the car now is a kind of "king cab"?!? The back is cutted this style...I have some pics in this stage, but I have in the camera, not downlowded yet..
ohhh yeahhh, I still have to cutt the gear box crossmember, as at full front flex, the front shaft is touching the crossmember...
The old "style" car you can see it on my club web page, under the "photo section", look at the Transylvania Adventure Trophy 2003, there is my GQ black color...
I'll keep you up-dated, with my changes...
www.offroadromania.com
Best regards, Gabriel
Thank you for your interest in my car...I have to tell you that my car is "under construction!!" since august...and I still have a lot of work to do on it...such as:
- MQ knukles (today I took it from the mechanic shop - I reverse the hooles up side down)
- the steering custom made rods (will be steinless steel, 42 mm diam, 3 wall, inside another bar with 33 diameter, also 3 mm wall). I bought the materials, but I have to machine it...
- the new shocks arrived before christmas, but I took it from the airport on jan 6th. Sway-a-way coilovers, 14" travel, 2.5" diam, w/res. I will replace my existing custom made coil-overs, as this are not good enough (broken easy...;-((. On jan 20th I will go to the factory in order to make the spings...so I'll install it on the car end of this month...
- I have to make the custom cuted prop shaft...as the rear axle is moved now 15 cm back...through the same steinless steel traction arms as will be the tie-rods...plus the fact that I made the arms with johnny joints at both ends (johnny joints that I made it, btw...)
...together with the 4-link triangulated rear susp...
...and thats all what is still pending...plus painting the car (will be Lamborghini Orange..
...did I forget to tell you that the car now is a kind of "king cab"?!? The back is cutted this style...I have some pics in this stage, but I have in the camera, not downlowded yet..
ohhh yeahhh, I still have to cutt the gear box crossmember, as at full front flex, the front shaft is touching the crossmember...
The old "style" car you can see it on my club web page, under the "photo section", look at the Transylvania Adventure Trophy 2003, there is my GQ black color...
I'll keep you up-dated, with my changes...
www.offroadromania.com
Best regards, Gabriel
GQ MWB 105 ", DID Mitsubishi engine with big turbo, fiber glass body, Boogger 38.5/11/16, 2x8274, 5 link front, triangulated 4-link rear, SAW 14" and 16" coil-overs, , 5.1 r&p.
...I forget to tell you that regarding the 7" lift, there was not a good idea...I found it out by myself, on the first comp with this lift, so I lowered the car 2"...now I'll keep it that high (thanks to the regulables "everything" I have under the car, is a easy job to high or lower the car now...). YES, 7" in a SWB is FAAAAAR too much...and is useless, even the suspension works great, the rear tires will rub on the inner guards...so no good idea...but this bed ideas I have to find it by myself, probing and testing... 
Gabriel
Gabriel
GQ MWB 105 ", DID Mitsubishi engine with big turbo, fiber glass body, Boogger 38.5/11/16, 2x8274, 5 link front, triangulated 4-link rear, SAW 14" and 16" coil-overs, , 5.1 r&p.
Guys,
I made some progress in building my car...\
I finalise the rear axle:
- triangulated 4 link on johnny joints and ball joints
- the rear axle is moved backwords about 14 cm
Centre: I cutted the T-case cross member, in order to allow the front driveshaft to move with the front suspension
Front:
- I reconstructed the coil-over upper mounts
- I beefed a bit the lower shock mounts
- I mounted the MQ style steering stuff...
The 8 liters aditional gas deposit is done (waiting to be mounted) - the little gas deposit has a shape that permit the car to be 90 degrees on on side, and the engine still has fuel.
On monday the car will be painted, so starting then I think in 2 weeks I will run it!!! (I cant wait to do that...;-)))
I'll keep you updated with the process.
Best regards, Gabriel
I made some progress in building my car...\
I finalise the rear axle:
- triangulated 4 link on johnny joints and ball joints
- the rear axle is moved backwords about 14 cm
Centre: I cutted the T-case cross member, in order to allow the front driveshaft to move with the front suspension
Front:
- I reconstructed the coil-over upper mounts
- I beefed a bit the lower shock mounts
- I mounted the MQ style steering stuff...
The 8 liters aditional gas deposit is done (waiting to be mounted) - the little gas deposit has a shape that permit the car to be 90 degrees on on side, and the engine still has fuel.
On monday the car will be painted, so starting then I think in 2 weeks I will run it!!! (I cant wait to do that...;-)))
I'll keep you updated with the process.
Best regards, Gabriel
GQ MWB 105 ", DID Mitsubishi engine with big turbo, fiber glass body, Boogger 38.5/11/16, 2x8274, 5 link front, triangulated 4-link rear, SAW 14" and 16" coil-overs, , 5.1 r&p.
Hi guys,
Finally, after a lot of hard work, my car is almost complete...(of course, as this issue is a "never ending story", I can't say the car is completed..;-)).
I've been 2 weeks ago to the first stage of the National Championship (I came 3rd overall) and the car works EXCELENT!!
here you have some pics, I hope you loke it!!
Best regards, Gabriel
Finally, after a lot of hard work, my car is almost complete...(of course, as this issue is a "never ending story", I can't say the car is completed..;-)).
I've been 2 weeks ago to the first stage of the National Championship (I came 3rd overall) and the car works EXCELENT!!
here you have some pics, I hope you loke it!!
Best regards, Gabriel
GQ MWB 105 ", DID Mitsubishi engine with big turbo, fiber glass body, Boogger 38.5/11/16, 2x8274, 5 link front, triangulated 4-link rear, SAW 14" and 16" coil-overs, , 5.1 r&p.
I don't know what is going on, but I can't see the attachement buttons here...?!?!?!??! For thoose of you that knows the Patrol-GQ-list, I have some pics there, under the Photo section...hmmmm.....strange I can't post pics....
GQ MWB 105 ", DID Mitsubishi engine with big turbo, fiber glass body, Boogger 38.5/11/16, 2x8274, 5 link front, triangulated 4-link rear, SAW 14" and 16" coil-overs, , 5.1 r&p.
Who is online
Users browsing this forum: No registered users and 3 guests