where do i get this from???
Posted: Fri Oct 12, 2007 12:31 am
the little foam strip thing under the wind screen??
go to bunnings as they sell something that might do the job 
Outer Limits 4x4 Board
Aussie Hardcore Wheelers
https://outerlimits4x4.com.au/
where do i get this from???
Page 1 of 1
Posted: Fri Oct 12, 2007 7:36 am
s.j.p. or try any rubber store in your town go to bunnings as they sell something that might do the job
go to bunnings as they sell something that might do the job Posted: Fri Oct 12, 2007 8:00 am
Suzuki spare parts for 1 million dollors
Posted: Fri Oct 12, 2007 8:30 am
i think i can live with out it then for that pricemuppet_man67 wrote:Suzuki spare parts for 1 million dollors
not to sure about bunnings i work there havent seen anything like that from memory but ill give it a go
cheers nick
Posted: Fri Oct 12, 2007 9:26 am
clark rubber. you might have to cut it to the correct width. some really thick neoprene would probably do the job.
Posted: Sat Oct 13, 2007 5:40 pm
As a bit of general advice, before you try and work out another solution, ALWAYS get a price from suzuki.
Some parts are surprisingly cheap - some seals etc are actually cheaper than from an industrial supplier.
Sure, if the SGP part is ridiculous, then sure, go to an alternative, but at least you'll know.
By the time you buy the right thickness, shape it and glue it in place, it might be easier to just buy the right bit.
Steve.
Some parts are surprisingly cheap - some seals etc are actually cheaper than from an industrial supplier.
Sure, if the SGP part is ridiculous, then sure, go to an alternative, but at least you'll know.
By the time you buy the right thickness, shape it and glue it in place, it might be easier to just buy the right bit.
Steve.
Posted: Sat Oct 13, 2007 6:29 pm
Gwagensteve wrote:As a bit of general advice, before you try and work out another solution, ALWAYS get a price from suzuki.
Some parts are surprisingly cheap - some seals etc are actually cheaper than from an industrial supplier.
Sure, if the SGP part is ridiculous, then sure, go to an alternative, but at least you'll know.
By the time you buy the right thickness, shape it and glue it in place, it might be easier to just buy the right bit.
Steve.
good point ill give them a call on monday