Page 1 of 1
Warn Controller wiring 5pin
Posted: Wed Jan 14, 2004 11:23 am
by spazbot
Ok im planning on putting a in cab controller switch in for my warn xd9000, i need to know how to wire up the 5 wires for controller to the switch, as in what needs to go where etc ??
Does anyone have a pic or a wiring diagram.
Posted: Wed Jan 14, 2004 12:04 pm
by spazbot
Ok ive found the info i was looking for, ill do a little write up on how i set it all up and inc some pics etc.
Posted: Thu Mar 11, 2004 10:34 pm
by Maggot4x4
spazbot wrote:Ok ive found the info i was looking for, ill do a little write up on how i set it all up and inc some pics etc.
Hows this going?
Posted: Mon Mar 22, 2004 6:47 pm
by slowhilux
yeah james hows this all going?? i will be doing the same in a few months.......
Phill
Posted: Mon Mar 22, 2004 6:59 pm
by spazbot
got all the diagrams etc here, just gotta wire it up soon, ill post up everything when i do
Posted: Wed Mar 24, 2004 6:29 pm
by tuff 45
spazbot wrote:got all the diagrams etc here, just gotta wire it up soon, ill post up everything when i do
I wired mine up in the cab and all you have to do is run 2 switche's in the cab, 1 for out and 1 for in, 2 wire's per switch. If you run the wire's straight from the solonoid's you can also leave the plug on the front of the winch and work it from out of the cab as normal.
Posted: Wed Mar 24, 2004 6:58 pm
by slowhilux
tuff 45,
yeah mate thats what i plan on doing (when i get a winch
), but instead of using 2 switches, i will use 1 switch that is:-
ON(momentary)-OFF-ON(momentary), ie, so it springs back into the off position as soon as you let it go. 1 On will = IN, and the other ON will = OUT
Phill
Posted: Wed Mar 24, 2004 7:31 pm
by tuff 45
slowhilux wrote:tuff 45,
yeah mate thats what i plan on doing (when i get a winch
), but instead of using 2 switches, i will use 1 switch that is:-
ON(momentary)-OFF-ON(momentary), ie, so it springs back into the off position as soon as you let it go. 1 On will = IN, and the other ON will = OUT
Phill
Sound's good.
Posted: Wed Apr 27, 2005 6:41 pm
by Bad JuJu
hey 13 months and a few days later ...... can anyone point me to the wiring setup/instructions used...
Posted: Wed Apr 27, 2005 11:22 pm
by spazbot
heres some diagrams
Posted: Thu Apr 28, 2005 2:24 pm
by Bad JuJu
nope, unless they are little x's.
Posted: Thu Apr 28, 2005 5:48 pm
by spazbot
oh well they been posted heaps in here search and find em
Posted: Thu Apr 28, 2005 5:53 pm
by blkmav
Posted: Thu Apr 28, 2005 8:43 pm
by Bad JuJu
Thanks, I did search and all images were busted.
