Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

front springs help

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 1
Joined: Thu Oct 25, 2007 5:51 am
Location: Launceston

front springs help

Post by rogue »

I picked up a set of front leafs from a local place the other day and just finshed installing them but in the process i had disconnected the propshaft and now it will not reattach.

I think the springs may not be right, as there is a 15mm gap between the rear of the diff and the propshaft, the wheels do not seem to be centred in the wheel arches and the hanger plates are extending forward not back.

Plus they are hard as a rock, jumping up and down on the bull bar, the front only moved a little bit.

What to do???
Top
Posts: 176
Joined: Sat Jun 16, 2007 8:18 am
Location: New Zealand

Post by bigbad »

are they the right way around, not back to front?
Top
Posts: 1606
Joined: Sat Oct 26, 2002 7:20 pm
Location: Geelong

Contact:
Contact HSV Rangie

Post by HSV Rangie »

check springs for correct use.

are they around the right way.

is the centre bolt in the right location.

Michael.
Mitsubishi 2010 NT DID Pajero wagon, Factory rear diff lock, Dual batteries, ARB bar, winch, Mt ATZ 4 rib tyres.
1986 RR.
Custom suspension links etc.
HSV 215 engine.
4.3 diffs.
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 0 guests