Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

URGANT: what is pinion angle set-up

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 262
Joined: Sun Sep 11, 2005 8:39 pm
Location: ipswich

Contact:
Contact Zuki

URGANT: what is pinion angle set-up

Post by Zuki »

Does anybody know what the pinion angle is set up at for Nissan diffs (GQ,GU) in different 4wd’s (non Nissan 4wd’s)?
cheers heath
gu ute 4"coils, amada xtremes, chopped chassis 450mm, 37" treps, rock sliders, internal cage, roof sliders, f&r air lockers, uhf, modified highmount winch, UFI turbo, km diesel inj pump.
Top
Posts: 870
Joined: Sat Jun 03, 2006 5:32 pm
Location: sydney

Post by MART »

Try this



http://www.baselinesuspensions.com/info/pinionangle.htm
BLOWNZUK 1.3 efi,sc14 supercharger,hilux diffs,detroit lockers,stage 4 rockhopper,6 point cage,35 muddies.
Top
Posts: 1258
Joined: Wed Mar 21, 2007 7:49 pm
Location: Mornington/ Victoria

Contact:
Contact PGS 4WD

Post by PGS 4WD »

With a regular two uni tailshaft the flanges need to be parallel, thats the pinion to the transfere case in order to reduce vibration, ideally if the uni angle is greater than 7 degrees you should be considering cardan joints.

Joel
-Pre trip inspections/ servicing
-Suspension/ custom modifications
-4wd Dyno & tuning
-Qualified mechanics
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: Bing [Bot] and 3 guests