My cruiser has an AXT Turbo kit on it fitted back in '99 by it's original owner.
http://www.axtturbo.com.au/IHZ.html
The hoses look the same as what they are using now, just not so shiny.
What is the lifespan for this type of hose, and how does it generally fail? My fear is being in the middle of nowhere and blowing a high pressure oil line. Drain line isn't under pressure and will just leak. Coolant lines are a risk for loss of coolant, but provided I catch that in time, the turbo will survive without coolant. Dumping all the oil however would be a less than ideal situation.
I assume the braid adds to strength and longevity as opposed to just cosmetics and abrasion resistance. What about the "teflon lined core"?
Thanx
Paul
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Hose Lifespan
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Hose Lifespan
Lexus LX470 - hrrm Winter Tyres
Gone - Cruiser HZJ105 Turbo'd Locked & Lifted
Gone - 3L Surf
Gone - Cruiser HZJ105 Turbo'd Locked & Lifted
Gone - 3L Surf
lol i was about to post up about how long horses live, but then got confused at what you typed and looked at the title again.
Usually they shouldnt blow, they will just start leaking, mainly around the crimped areas. If youre worried just take a spare and inspect it every now and then. They usually swell too if they arent too healthy.
Usually they shouldnt blow, they will just start leaking, mainly around the crimped areas. If youre worried just take a spare and inspect it every now and then. They usually swell too if they arent too healthy.
Re: Hose Lifespan
the PTFE (polytetrafluoroethylene :- teflon) liner will out last any other hose on the market, most are rated up to 300deg C working temp and 3000psi working pressure (the stuff I sell does anyway). With the teflon liner, never ever bend it any further than it sits naturally as it will kink the liner, but will have no visable effect from the outside. I use it for air (truck compresor hose's), brake lines, turbo and general engine oil lines, engine coolant lines, and hydraulic applications and from the work I have done, no come backs.me3@neuralfibre.com wrote: What about the "teflon lined core"?
BUT as with any hose it depends on its lifespan in the particular situation, I know of machines working in extreme conditions that a hose valued at 8k will only last 8hrs, due to the system fluctuations and working environment. In your situation you wont have any probs
Who is online
Users browsing this forum: No registered users and 1 guest