What thrust bearing carrier and bearing are the guys with 5.0l Holdens mated to R150Fs using.
I found one from an LN 130 3VZE which has a 65mm OD thrust bearing but otherwise is the same as my 4 Runner one. The 65mm OD is better than the 4 Runner 55mm OD.
The Marks Kit instruct you that a cast thrust bearing carrier from a HiLux will work with their thrust bearing kit (which has a 75mm OD bearing), but which one? From what Hilux?
Any help is appreciated guys.
Cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Thrust bearing carrier
Moderators: toaddog, Elmo, DUDELUX
Who is online
Users browsing this forum: No registered users and 0 guests