how & what do i need to convert my rear drums to disk br

Post by **MUSS** » Sun Jan 18, 2004 9:31 pm

i own a 1986 BJ73 toyota mid-wheel-base landcruiser and i am planing on converting my rear drums to disks when i change to 60 series axels but have no idea what is involved and what i need........ can anyone help me?

Post by **planb** » Mon Jan 19, 2004 8:07 am

ori or chaos sell a complete kit with vented rotors, callipers and brackets.

Post by **MUSS** » Mon Jan 19, 2004 4:14 pm

thanks mate...but im wondering if i can use second hand brake calipers and shit to do the job maybe from a later model 60/80series?

Post by **60serius** » Wed Jan 21, 2004 4:48 pm

60 series sahara,s came out with rear disks but are tyo hard to find
source a caliper bracket from some ware ( eureka in melbourne have them) and fit hilux solid disks and calipers I have them on mine and they
work great with 35''s

Post by **cbr** » Wed Jan 21, 2004 5:28 pm

60serius wrote:60 series sahara,s came out with rear disks but are tyo hard to find
source a caliper bracket from some ware ( eureka in melbourne have them) and fit hilux solid disks and calipers I have them on mine and they
work great with 35''s

What are you doing for a handbreak ??

How much for the caliper bracket??

Chris

Post by **cbr** » Wed Jan 21, 2004 6:37 pm

60serius wrote:60 series sahara,s came out with rear disks but are tyo hard to find
source a caliper bracket from some ware ( eureka in melbourne have them) and fit hilux solid disks and calipers I have them on mine and they
work great with 35''s

Did you upgrade the master cyliner or booster??

What abou the brake Load Sensing Proportioning Valve (LSPV) in the rear??

Chris.

Post by **Shorty40** » Wed Jan 21, 2004 7:32 pm

cbr wrote:
60serius wrote:60 series sahara,s came out with rear disks but are tyo hard to find
source a caliper bracket from some ware ( eureka in melbourne have them) and fit hilux solid disks and calipers I have them on mine and they
work great with 35''s

What are you doing for a handbreak ??
How much for the caliper bracket??

Chris

What about one of these ?

Post by **cbr** » Wed Jan 21, 2004 7:52 pm

Shorty40 wrote:
What about one of these ?

Yea I know about the t/case handbreaks. I was thinking like a 80's series handbreak, in the disc?? or caliper activated handbreak??

Chris.

Post by **2car** » Thu Jan 22, 2004 7:39 am

[hijack]
I am in the middle of doing the read disk conversion. What studs should I use on the rear? I was thinking about using some front hub studs, but the flange on the rear hub is much thinner and the longer studs may cause problems if the wheel nuts bottom out on the thread before pulling up on the wheel.

Does anyone have contact details for Eureka? Prefer email.

Thanks

Ben
[/hijack]

Post by **bj on roids** » Thu Jan 22, 2004 9:37 am

Ive got the bolt on rear brackets to sell for a 60 series rear diff.

ive got the brackets or the complete setup for sale.

dunno what i want for the brackets and stuff.

ive also got complete housings too....

Post by **Webbie** » Thu Jan 22, 2004 9:47 am

Ive heard u can use 1st & 2nd gen rotors have em machined to fit ya rear housing and use early mod subaru(leone ,brumby, etc ) calipers that have the hand brake on the discs the same set up as norm but have to make mounting brakets for the calipers :idea:

Post by **60serius** » Thu Jan 22, 2004 5:14 pm

Chris[/quote]

What about one of these ?

[/quote]

Thats exactaly what I have, You can get calipers with the hand brake cable
in them from Snake racing.
Eureka make the disc tail shaft brake as well

Eureka 03 97608229
346 Frankston Dandenong rd Dandenong
Prices? Ring and enquire!!!

Post by **60serius** » Thu Jan 22, 2004 5:26 pm

Also forgot Up grade the pissy vacume tank to one off a 40 series
this made a lot of differance

Outer Limits 4x4 Board

how & what do i need to convert my rear drums to disk br

how & what do i need to convert my rear drums to disk br

rear discs

Who is online