i am about to have a crack at wireing up the g13bb into my 97 sierra.
should not be to much of a problem just wondering if anyone had any tips.
Thanks Sam
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
G13BB wireing
as said in my other thread posts, depends how technical you want to get.
With mine the loom came complete. fuse box and all. So it was a matter of locating and connecting up 5 wires. Acc, power, neg, fuel pump and coolant temp. Or, doing it the hard way would mean stripping everything unneccessary from the jimny loom(lights, indicators etc).
Your choice.
With mine the loom came complete. fuse box and all. So it was a matter of locating and connecting up 5 wires. Acc, power, neg, fuel pump and coolant temp. Or, doing it the hard way would mean stripping everything unneccessary from the jimny loom(lights, indicators etc).
Your choice.
85 LWB w. FRP Canopy
Ca18det conversion in progress, Vit PS, RUF,
6.5:1's, 33x12.5 Bfg's, custom front and rear bars.
Ca18det conversion in progress, Vit PS, RUF,
6.5:1's, 33x12.5 Bfg's, custom front and rear bars.
Who is online
Users browsing this forum: No registered users and 3 guests