Outer Limits 4x4 Board

I have a v6 conversion in my lux and seem to be having a bit of trouble getting it in to gear since i replaced the gearbox,its been setup exactly the same way as it was before i pulled the box out but the only difference is i put a heavy duty daikin clutch in the truck its alright threw the gears but just getting it in to gear is the problem

either the clutch needs adjusting (could be on the back of the master cylinder where it attaches to the pedal) or it is not engauging properly (master cylinder or slave cylinder maybe not working if it is a hydraulic setup)

I had a heavy duty one in my lux and shattered a spring in the centre of the clutch plate which caused it to do exactly the same as what yours is now doing....

Have a look at the hydraulic side of it first or if its a brand new clutch... do the adjustments at the master cylinder.

Brad

yea ive just recently replaced the master cylinder because it was leaking fluid so ill try adjusting the clutch pedal and see how i go
thanx mate