Anyone know where to get good strong steps/sill protection for a 2002 model defender. My mate has just got one and is after some heacvy duty ones. any pics
thanks
Cplux@yahoo.com
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
defender steps/sill protection
Moderator: Micka
Why don't you guys get a 7.5x7.5 cm steel section, cut it to length, and weld on some mounts to the outriggers. A buddy of mine did it. It should not cost you much at all...
LR Disco truggy:
42" Iroks, ZF, dual cases & ARBs, 30 splined, Longfielded, OMEs, Optimas, M8274-50s, Rockstomper rope & Bead-L
LR D-90 TD5 ST:
33" BFT AT, tuned, caged, 1/2 top
42" Iroks, ZF, dual cases & ARBs, 30 splined, Longfielded, OMEs, Optimas, M8274-50s, Rockstomper rope & Bead-L
LR D-90 TD5 ST:
33" BFT AT, tuned, caged, 1/2 top
I have some Mantec sliders which are damn fine. http://www.mantec.co.uk/
Look easy enough to build - they are essentially a length of box section with mounts on one side that pick up the bulkhead mount at the front and the tube at the rear. (90's have a tube, 110s dont)
As long as you keep the base of the sliders free to slide over things and attach them to solid enough points on the chassis they will be fine. Mine will hold the weight of the vehicle without bending.
Build them to stick out a few inches from the doors like these
http://home.off-road.com/~landy/sidebars.htm
they have saved the panels lots of times.
ct
Look easy enough to build - they are essentially a length of box section with mounts on one side that pick up the bulkhead mount at the front and the tube at the rear. (90's have a tube, 110s dont)
As long as you keep the base of the sliders free to slide over things and attach them to solid enough points on the chassis they will be fine. Mine will hold the weight of the vehicle without bending.
Build them to stick out a few inches from the doors like these
http://home.off-road.com/~landy/sidebars.htm
they have saved the panels lots of times.
ct
Who is online
Users browsing this forum: No registered users and 0 guests