hey guys im asking on behalf of a mate he has the 2002 2.8 turbo diesel hilux, with leafs spring on rear and inderpendant on the front,
what sort of dollor is he looking at to lift it?
as well as price on body lift blocks for it and or where he can get it done in melbourne
cheers matt
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
hilux lift
Moderators: toaddog, Elmo, DUDELUX
hilux lift
1995 land rover disco on 265 muddies
Don't know about price, but the front torsion bars can wound up to give a bit of height. Down travel in the suspension will be lost though. Ball Joint Spacers are available to get some down travel back.
Another front option at about $2500 I think is the bolt on 4 inch lift for the front.
As for he rear, extended shackles and or reset springs will work. Trouble with the Lux, when is there is no weight in the back, its hard to get the rear springs to flex, unless you go for real soft ones then load carrying capacity is lost. In my case, I got real hard springs and installed an air locker to compensate for wheel lift.
No flex at all;
Another front option at about $2500 I think is the bolt on 4 inch lift for the front.
As for he rear, extended shackles and or reset springs will work. Trouble with the Lux, when is there is no weight in the back, its hard to get the rear springs to flex, unless you go for real soft ones then load carrying capacity is lost. In my case, I got real hard springs and installed an air locker to compensate for wheel lift.
No flex at all;
I'm the sharpest tool in the shed!
Who is online
Users browsing this forum: No registered users and 0 guests