G'day,
I am using a comodore alternator on my surf and it has just been reconditioned but it is only puting out 14 volts not 14.4.
When i increase load ie. put the headlights on, the volts drop back dependant on load, but night driving it drops right back to 12.6v
Any ideas what would be causing this?
thanks for any help.
regards
Leeham
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
14volts dropping to 12.6 with headlights
Moderator: -Scott-
14volts dropping to 12.6 with headlights
Bloody IFS bugger who slows down the SAS boys.
www.vickrawlers.com
www.vickrawlers.com
hi..
mine has similar problem.
When i use the signal lights , the voltage will swing between 12 and 14 volts according to the blinkers. At certain times, my radio head unit would reset itself. Especially when i switch on the foggies or the a/c
What seems to be the problem ?
Thanks
btw .. there is a wineing sound that goes louder as i depress the accelerator.
mine has similar problem.
When i use the signal lights , the voltage will swing between 12 and 14 volts according to the blinkers. At certain times, my radio head unit would reset itself. Especially when i switch on the foggies or the a/c
What seems to be the problem ?
Thanks
btw .. there is a wineing sound that goes louder as i depress the accelerator.
thanks
..
Any idea which wire it is most likely to be ?
My battery died when the wire to my winch short circuited when the heat shrink on the connectors broke off due to weathering. Thus, when i ran the winch , my winch heated up and smoke was seen from the winch .
I have repaired the winch and all is good .. seems like I have to :hunt down" the bad earth ... how do i go about it, use a multimeter to check for continuity ?
thanks again
..
Any idea which wire it is most likely to be ?
My battery died when the wire to my winch short circuited when the heat shrink on the connectors broke off due to weathering. Thus, when i ran the winch , my winch heated up and smoke was seen from the winch .
I have repaired the winch and all is good .. seems like I have to :hunt down" the bad earth ... how do i go about it, use a multimeter to check for continuity ?
thanks again
Who is online
Users browsing this forum: No registered users and 4 guests