Page 1 of 1
1hdt turbo on a 1hz engine
Posted: Sun Dec 23, 2007 1:16 pm
by kingchevy
Hey guys
I have a 1hdt turbo exhaust manifold and all the extras of a motor we were wrecking. Will the turbo manifold ect fit straight onto a 1hz engine with out any modifications?
Posted: Sun Dec 23, 2007 6:10 pm
by dogoff
The exhaust gasket part numbers are the same
so should be ok
Posted: Sun Dec 23, 2007 9:42 pm
by udm
Yes, it all fits.
This is a 1hdt turbo/manifold onto a 1hz... little advice, i found that the manifold and turbo exhaust housing have to be bolted onto the engine in one piece, I dont remember why though.
Posted: Mon Dec 24, 2007 7:07 am
by dow50r
Pity you dont use the head and pistons aswell, then its a hdt
Posted: Mon Dec 24, 2007 8:01 pm
by nads
dow50r wrote:Pity you dont use the head and pistons aswell, then its a hdt
almost. throw on the 1hdt fuel pump too.
Posted: Sat Dec 29, 2007 9:09 am
by kingchevy
Can you interchange the injector pumps??
Posted: Sat Dec 29, 2007 12:12 pm
by rezpkt
more to the point, is the 1HZ injector pump sufficient just by cranking up fuel supply and then a dyno?
Or completely recalibrate?
sorry for the slight highjack, this is something im looking at doing later too.
Posted: Sun Dec 30, 2007 6:46 pm
by dow50r
Nads is right, you need the dt pump as the timing is all different...