40 series Bell Crank?

Post by **RUFF** » Tue Dec 25, 2007 11:09 am

Anyone know where to buy one of these new or a kit to repair it? For those that dont know what the bell Crank is its the part of the steering that bolts into the corner of the frame out front between the steering box and the diff.

This allready has factory power steer so i dont need to convert it to 60 series steering as yet.

Allso i need the Rag joint btween the steering column and the steering box if anyone knows where i can buy a new one of these as well.

Preferably after market.

Post by **RUFF** » Tue Dec 25, 2007 11:19 am

I just found a kit for the bell crank on ebay. http://cgi.ebay.com.au/TOYOTA-LANDCRUIS ... dZViewItem

Anyone know of anywhere in Brisbane selling this kit?

Post by **simkell** » Tue Dec 25, 2007 11:29 am

i thought terrain tamer did these. just need to find your local terrain tamer dealer.

Post by **RUFF** » Tue Dec 25, 2007 11:52 am

simkell wrote:i thought terrain tamer did these. just need to find your local terrain tamer dealer.

Thanks. I know a local dealer for them.

Post by **shorty_f0rty** » Tue Dec 25, 2007 9:54 pm

sunshine state 4wd should have all the bits you need..

Post by **RUFF** » Wed Dec 26, 2007 7:52 am

shorty_f0rty wrote:sunshine state 4wd should have all the bits you need..

Thanks. Thats the local dealer i was thinking of.

Post by **bj on roids** » Wed Dec 26, 2007 9:08 am

I think Memmot's can rebuild it too (Repco)

I personally think you are wasting your time, but..

Post by **RAY185** » Wed Dec 26, 2007 3:48 pm

Pretty sure Repco do it in a Maxi Trac brand.

IDLER KIT-STEERING - Part No: 040-001128
Retail: $83.99
Trade: a touch cheaper than the ebay price.

Dont know about getting the rag joint aftermarket though, pretty sure its genuine only. I should have a decent second hand one here off my old column if you want it.

Post by **shorty_f0rty** » Wed Dec 26, 2007 8:58 pm

RAY185 wrote:

Dont know about getting the rag joint aftermarket though, pretty sure its genuine only. I should have a decent second hand one here off my old column if you want it.

Roothy got his steering stuff refreshed in the latest 4wdm mag and mentioned the aftermarket rag joint (terrain tamer i think) so i reckon you could get that from sunshine state 4wd too.. nfi about cost tho.. but anythings gotta be cheaper than genuine eh

Post by **NICK** » Thu Dec 27, 2007 6:04 pm

terry is ya hook up for that. ring him and do some name dropping.

NICK

Post by **RUFF** » Fri Dec 28, 2007 8:58 am

Thanks Guys Bought one yesterday from sunshine state 4wd. $65.00.

And they can supply the rag joint as well for $45 but didnt have one in stock.

Post by **bj42turbo** » Fri Dec 28, 2007 11:38 am

was that a kit or the complete unit Ruff

BJ

Post by **RUFF** » Fri Dec 28, 2007 7:46 pm

bj42turbo wrote:was that a kit or the complete unit Ruff

BJ

Just the kit.

They also do 2 different types. One from Taiwan = $65.00 and one from Japan = $105.00. I dont plan on running this set up for long so bought the cheaper one.

Post by **bj42turbo** » Fri Dec 28, 2007 8:27 pm

RUFF wrote:
bj42turbo wrote:was that a kit or the complete unit Ruff

BJ
Just the kit.

They also do 2 different types. One from Taiwan = $65.00 and one from Japan = $105.00. I dont plan on running this set up for long so bought the cheaper one.

cool ta

BJ

Outer Limits 4x4 Board

40 series Bell Crank?

40 series Bell Crank?

Who is online