Page 1 of 1
Ideas on home brew fridge slide
Posted: Tue Jan 01, 2008 8:42 pm
by sloshy
Going to put an engel in the back of a gu wagon, just wondering what
people used for a fridge slide instead of buying one.
Posted: Tue Jan 01, 2008 9:20 pm
by Swerve
I used slides from ebay like this one
http://cgi.ebay.com.au/Drawer-Runners-S ... dZViewItem
My drawer doesnt use runners just plastic strips underneath and wood inplace so it can't tilt or lift up. Stove is on a cheap set of drawer runners from mitre 10
Posted: Tue Jan 01, 2008 9:39 pm
by -Scott-
I used Hafele rails for my fridge slide too - not cheap!
Posted: Thu Jan 03, 2008 12:23 pm
by sw1
just done, not completely finished tho, a set of draws & fridge slide for the back of my gu. two draws side by side and fridge slide above, & completely independant of, the drivers side draw
fridge is a waeco 110
used accuride slides from concept latch in vic. very, very happy with the slides. they work a treat & they lock in & out. perfect fit between the back doors & a milford cargo barrier & slide length lets fridge comes out with ample space to open the fridge door
however going to make something so the lever on each slide can be pulled from one central point. two separate levers has proved to make it hard to operate sometimes.
Posted: Fri Jan 04, 2008 8:43 pm
by me3@neuralfibre.com
Don't buy the 4wd systems one, not real happy with it.
The Waeco one looked fine.
Paul
Posted: Fri Jan 04, 2008 9:00 pm
by tj81
I have used old Computer Server Rack mount brackets that have been taken out of systems we have pulled out !! Theyre rated to carry some pretty heavy server equiptment so for nothing i thought they do the job rather well !!