Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

3"+ Lifted 75's

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 309
Joined: Sun Apr 24, 2005 8:20 pm

3"+ Lifted 75's

Post by Thommo 73 »

what do people do for tail shafts on 3"+ lifted 75's
half way thru coiling the middy and put the tail shaft on today to find out it can go down 5mm more than at ride hight before binding up :x .

so what do the SOA guys do? double cardin or .....?
1uzed and no home for it
Posts: 309
Joined: Sun Apr 24, 2005 8:20 pm

Post by Thommo 73 »

so no body know...ha i would have thuoght some here has done a spring over or at least had tail shaft probs?

it's the front one and the yokes are binding up..?
1uzed and no home for it
Posts: 762
Joined: Tue Oct 26, 2004 6:46 pm
Location: Diamond Creek

Post by mule75 »

have not had a problem. just turned front shaft backwards so the fat bit does not hit the cross member. it's on a hzj75 about 3-4 inch lift with longer springs to get the front axle to sit in the standard position so the shock doesn't rub on the mount.
Posts: 23
Joined: Tue Jan 08, 2008 3:02 pm
Location: CAIRNS

Post by todsmods »

hey man my 75 is lifted around 6inches with no tailshaft dramas.
Posts: 309
Joined: Sun Apr 24, 2005 8:20 pm

Post by Thommo 73 »

hhhmmm. thats interesting to say the least..

what type of 75 is it?

hzj's run the high pinion front dont they? and a different gearbox to boot ?
1uzed and no home for it
Posts: 1442
Joined: Tue Jun 27, 2006 8:30 pm
Location: nsw

Post by 75 cruser »

sounds like you will have to shorten them :D

rob
come on move over and let the 75 through
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests