Page 1 of 1
3"+ Lifted 75's
Posted: Sat Jan 12, 2008 2:43 pm
by Thommo 73
what do people do for tail shafts on 3"+ lifted 75's
half way thru coiling the middy and put the tail shaft on today to find out it can go down 5mm more than at ride hight before binding up
.
so what do the SOA guys do? double cardin or .....?
Posted: Mon Jan 14, 2008 3:52 pm
by Thommo 73
so no body know...ha i would have thuoght some here has done a spring over or at least had tail shaft probs?
it's the front one and the yokes are binding up..?
Posted: Mon Jan 14, 2008 5:42 pm
by mule75
have not had a problem. just turned front shaft backwards so the fat bit does not hit the cross member. it's on a hzj75 about 3-4 inch lift with longer springs to get the front axle to sit in the standard position so the shock doesn't rub on the mount.
Posted: Mon Jan 14, 2008 5:46 pm
by todsmods
hey man my 75 is lifted around 6inches with no tailshaft dramas.
Posted: Mon Jan 14, 2008 5:55 pm
by Thommo 73
hhhmmm. thats interesting to say the least..
what type of 75 is it?
hzj's run the high pinion front dont they? and a different gearbox to boot ?
Posted: Mon Jan 14, 2008 8:15 pm
by 75 cruser
sounds like you will have to shorten them
rob