Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Ford XF P/S Pump

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 1490
Joined: Thu Nov 28, 2002 12:53 pm
Location: Brisbane - D'Bay

Ford XF P/S Pump

Post by Willy Hilux »

Any body know how to get the pulley off the pump?? Is it just a pressed on fit?? There is a socket head at the front for an allen key.....
AMADAXTREME Racing
Sponsors-
AmadaXtreme
Superior Engineering
www.superiorengineering.com.au/
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

Yes they are just pressed on. There is a special tool to get them off but they can be a real PITA. You cant put them in a press because the pully is very weak and will just bend. Best bet would be take it into a steering specialists and get them to pull it off for you.
Top
User avatar
RAY185
Resident Terrorist
Posts: 4278
Joined: Fri May 21, 2004 9:37 am
Location: Driving Barnsey's mum to bingo

Post by RAY185 »

x2 absolute pain in the arse without the right puller. Like Ruff Said, slip a specialist $10 and get him to do it properly or you will destroy it.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 1 guest