Page 1 of 1
Who should I buy a 50mm Body Lift from to suit GU Ute
Posted: Sat Jan 19, 2008 12:56 pm
by Diabolic
I am in WA and looking for a 50mm Body Lift for my GU patrol tray back ute, I'm running 315/85-16's it has 3" spring lift but I get quite a bit of fouling on the guards/lower front 1/4's
Any ideas of websites that I can buy from would be great.
BD
Posted: Sat Jan 19, 2008 2:26 pm
by simcoz
don't go body lift,(they suck imo)
get radius arm spacers to move your front forward,think about 15mm.
if thats not enough try some 1' coil spacers or lower your bump stops abit.
Superior engineering can supply all these parts(link in my sig).
Coza
Posted: Sat Jan 19, 2008 7:27 pm
by rvh96
simcoz wrote:don't go body lift,(they suck imo)
get radius arm spacers to move your front forward,think about 15mm.
if thats not enough try some 1' coil spacers or lower your bump stops abit.
Superior engineering can supply all these parts(link in my sig).
Coza
x2, body lifts are crap on GUs and not needed, radius arm spacers are the way to go.I run 37inch bais claws on my coil cab with 25mm longer drop radius arms and no rubbing anywhere.body lift and suspension lift wont solve the problem anyway you have to move the tyre forward away from the guards
Posted: Sun Jan 20, 2008 11:41 am
by Mousie
best way i reccon go to boat shop and u can buy there like rollers and u make watever size u need for clearence if u got issues with scrub
so u can have like half inch or wat ever size u need exactly so u can get away u just cut em down to size and make shore there all the same..
u can get a 12" lenth of the stuff with a crush tube in it i swear its teh same shit as spacers u buy
Posted: Sun Jan 20, 2008 1:16 pm
by taps
Mousie wrote:best way i reccon go to boat shop and u can buy there like rollers and u make watever size u need for clearence if u got issues with scrub
so u can have like half inch or wat ever size u need exactly so u can get away u just cut em down to size and make shore there all the same..
u can get a 12" lenth of the stuff with a crush tube in it i swear its teh same shit as spacers u buy
use alloy and half inch bolts so you can get it engineered !!!!
Posted: Sun Jan 20, 2008 1:22 pm
by badger
body lifts crack cabs
and they are not needed to clear tyres. having the highest truck around was kool 3 years ago, now people do it the right way with bump stops arm spacers and a grinder
and you end up with a more stable longer lasting rig that doesnt stand out as much to the cops