roof lining

Post by **ofr57** » Sat Jan 19, 2008 4:28 pm

afternoon all
I've noticed I've got a tiny hole in my roof an soon going to fix it .. went to inspect in on the inside but the roof lining doesn't pull out ... is it glued?

whats others done to remove it

Post by **nicbeer** » Sat Jan 19, 2008 4:30 pm

tintop?

yep. glued down. i had to do the same to mine.

Post by **ofr57** » Sat Jan 19, 2008 5:03 pm

ute
the holes (3)

are located at the back edge of the roof around the center

options now are
.fibreglass/ bog
.weld it
.lead braze
or something else????

Post by **nicbeer** » Sat Jan 19, 2008 5:26 pm

i bogged mine from underneath and on top. with flyscreen style stuff in the hole after i cleaned it up.

Glue is damn strong as well on the headlining. may want to redo it after or use spray glue to put it back on.

up to your skills and tools. weld be best i think but bog ll do.

Post by **PJ.zook** » Sat Jan 19, 2008 8:25 pm

What happens if you have destroyed the lining on removal, what has everyone else used to replace it with?

Post by **nicbeer** » Sat Jan 19, 2008 9:33 pm

mine was redoable to restick.

but u could use speaker carpet, marine carpet etc

Post by **ofr57** » Mon Jan 21, 2008 3:36 pm

ok taken some bog away an I've found a seem in the almost middle of the roof

... was the roof made in 2 pieces in factory?

Post by **Spike_Sierra** » Tue Jan 22, 2008 3:51 pm

PJ.zook wrote:What happens if you have destroyed the lining on removal, what has everyone else used to replace it with?

or what happens if you dont have any lining hey PJ....echo echo echo..

Outer Limits 4x4 Board

roof lining

roof lining

Who is online