Page 1 of 1
roof lining
Posted: Sat Jan 19, 2008 4:28 pm
by ofr57
afternoon all
I've noticed I've got a tiny hole in my roof an soon going to fix it .. went to inspect in on the inside but the roof lining doesn't pull out ... is it glued?
whats others done to remove it
Posted: Sat Jan 19, 2008 4:30 pm
by nicbeer
tintop?
yep. glued down. i had to do the same to mine.
Posted: Sat Jan 19, 2008 5:03 pm
by ofr57
ute
the holes (3)
are located at the back edge of the roof around the center
options now are
.fibreglass/ bog
.weld it
.lead braze
or something else????
Posted: Sat Jan 19, 2008 5:26 pm
by nicbeer
i bogged mine from underneath and on top. with flyscreen style stuff in the hole after i cleaned it up.
Glue is damn strong as well on the headlining. may want to redo it after or use spray glue to put it back on.
up to your skills and tools. weld be best i think but bog ll do.
Posted: Sat Jan 19, 2008 8:25 pm
by PJ.zook
What happens if you have destroyed the lining on removal, what has everyone else used to replace it with?
Posted: Sat Jan 19, 2008 9:33 pm
by nicbeer
mine was redoable to restick.
but u could use speaker carpet, marine carpet etc
Posted: Mon Jan 21, 2008 3:36 pm
by ofr57
ok taken some bog away an I've found a seem in the almost middle of the roof
... was the roof made in 2 pieces in factory?
Posted: Tue Jan 22, 2008 3:51 pm
by Spike_Sierra
PJ.zook wrote:What happens if you have destroyed the lining on removal, what has everyone else used to replace it with?
or what happens if you dont have any lining hey PJ....echo echo echo..