Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

60s steering

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 53
Joined: Tue Mar 23, 2004 12:31 pm
Location: Coogee

60s steering

Post by Coogee60 »

Hi,
Gave the 60 a bit of a hammering last weekend and now its drifting all over the road. Initially thought it would just be a wheel alignment but upon closer inspection I have bent the main tow arm (wheel to wheel) on the steering. I haven't messed around with the steering before, if I can get a new arm is it a big job to swap it over? Does it require hoists etc? Any help would be great.
Simon.
FJZ80, 3 inch long travel, 35's, rear locker.
Top
Posts: 2765
Joined: Wed Jan 14, 2004 10:32 pm
Location: somewhere out there

Post by shorty_f0rty »

should be able to get a tie rod from a wreckers, it might need new tie rod ends depending on play in the ends on the one from the wreckers.

you'll need a ball joint seperator too (from repco or supercheap) to get the tie rod arms off the swival arms.

should get you started..
Built, not bought!
'84 BJ42 - sold! :(
'79 Coiled and turbo diesel'd FJ55
Top
Posts: 314
Joined: Thu Aug 16, 2007 6:29 pm
Location: RANDWICK

60

Post by teambullet »

Sounds all too familiar!!!! It happened to me on my 75 got new ends and sleeved the tube, shouldnt happen again. Might even have a sleeved 60series one. If so will pm you,
Denny
R.I.P SILVER BULLET.
TOW RIG D4D 2011 LUX ON 33s. COMP RIG 95 SIGLE CAB LUX
SPONSORS EASTCOAST 4WD EASTSIDE AUTO KAR PRO TYRE AND AUTO
TECH ENGINEERING
Top
Posts: 422
Joined: Wed Nov 22, 2006 1:47 pm
Location: surf coast, victoria

Post by cruiser60series »

[quote="shorty_f0rty"]
you'll need a ball joint seperator too (from repco or supercheap) to get the tie rod arms off the swival arms.
quote]

oxy and a hammer if your a tight arse like me.
At first I thought it was a sea anemone, upon closer inspection I realised it was a funky ball of tits from outer space.
Top
Posts: 675
Joined: Sat Dec 17, 2005 10:06 pm
Location: campbelltown

Re: 60s steering

Post by Nat84 »

Coogee60 wrote:Hi,
Gave the 60 a bit of a hammering last weekend and now its drifting all over the road. Initially thought it would just be a wheel alignment but upon closer inspection I have bent the main tow arm (wheel to wheel) on the steering. I haven't messed around with the steering before, if I can get a new arm is it a big job to swap it over? Does it require hoists etc? Any help would be great.
Simon.
i have one of them tow arm's here PM me if interested
Tires are like boobs, they always look big until you have played with them for a while, then you just want a bigger set
Top
Posts: 53
Joined: Tue Mar 23, 2004 12:31 pm
Location: Coogee

Post by Coogee60 »

Thanks all. Should be able to get it sorted with the help. Only put around 300k's on it since the damage and its already chewing the muddies to bits.
FJZ80, 3 inch long travel, 35's, rear locker.
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 2 guests